Homework Answers
as per Gidlinces of HomeworkLib
solved this question
Add Answer to:
In an X-ray system there is a Soller slit on the incident beam side with 25...
a) A beam of monochromatic light is incident on a single slit of width 0.600 mm....
a) A beam of monochromatic light is incident on a single slit of width 0.600 mm. A diffraction pattern forms on a wall 1.40 m beyond the slit. The distance between the positions of zero intensity on both sides of the central maximum is 1.90 mm. Calculate the wavelength (in nm) of the light. Round your answer to the nearest nm. b) The hydrogen spectrum includes a red line at 656 nm and a blue-violet line at 434 nm. If...
1. The beam below is supported by rollers on the left side and is fixed on...
1. The beam below is supported by rollers on the left side and is fixed on the right side. There is a linear distributed load along the length of the beam shown in figure (a) and the deflection of the beam is given and shown in figure (b). The figures are not drawn to scale. (x = L. y = 0) (x = 0, y = 0) (a) Length, L = 600 (cm) Youngs Modulus, E = 50,000 (KM) Area...
A laser beam ( - 632.6 nm) is incident on two slits 0.200 mm apart. How...
A laser beam ( - 632.6 nm) is incident on two slits 0.200 mm apart. How far apart are the bright interference fringes on a screen 5 m away from the double slits? cm 2. (-/10 Points) DETAILS SERCP7 24.P.002. MY NOTES PRACTICE ANOTHER In a Young's double-slit experiment, a set of parallel sits with a separation of 0.050 mm is illuminated by light having a wavelength of 593 nm and the interference pattern observed on a screen 3.50 m...
10.A narrow beam of white light is incident normally on the surface of a triangular silicate...
10.A narrow beam of white light is incident normally on the surface of a triangular silicate flint glass prism with one angle of 90. The index of refraction for violet light is 1.66 and for red light is 1.61. The angle in the prism is equal to 30° of glass. a. On the diagram below show an approximate sketch for the refracted light from the opposite face of the prism. Air B White light 780° Glass Calculate angular separation between...
16. A Young's double slit has a slit separation of 2.50 x 10 m on which...
16. A Young's double slit has a slit separation of 2.50 x 10 m on which a monochromatic light beam is directed. The resultant bright fringes on a screen 1.00 m from the double slit are separated by 2.30 x 10 m. What is the wavelength of this beam?(1 nm-10 m) a. 373 nm b, 454 nm 575 nm d. 667 nm 17. What is the minimum thickness of a glycerin film (n 1.47) on which light of wavelength 600...
An X ray beam of wavelength 77.00 pm is directed along the x axis in the...
An X ray beam of wavelength 77.00 pm is directed along the x axis in the positive x direction and is incident on a carbon target. Scattered X rays are detected at an angle to the x axis of pi/2 radians. For each of these scattered X rays an electron is produced with momentum component in the x direction of: 8.605 times 10^24 kg m s^-1 zero 8.342 times 10^24 kg m s^-1 8.885 times 10^24 kg m s^-1 none...
can somebody please help me with these questions, thank you very much 10. In Young's double-slit...
can
somebody please help me with these questions, thank you very
much
10. In Young's double-slit apparatus the slits are senerated by a distance of 0.55 x 10 m. A screen 15 located 4 m from the plane of the slits. When light of wavelength 550 nm illuminates the slits, the distance on the screen between the central bright fringe and the third bright fringe on either side is a 4x 10mb. 8x 10-m c. 12 x 10 m d...
4. (10 pts) An electron in a cathode-ray beam passes between 2.5-cm-long parallel-plate elec- trodes that...
4. (10 pts) An electron in a cathode-ray beam passes between 2.5-cm-long parallel-plate elec- trodes that are 5.0 mm apart. A 2.0 mT, 2.5-cm-wide magnetic field is perpendicular to the electric field between the plates. The electron passes through the electrodes without be- ing deflected if the potential difference between the plates is 400 V. What is the electron's speed? A. 4 x 10° m/s B. 1 x 107 m/s C. 4 x 107 m/s D. 9 x 107 m/s...
A collimated beam of laser light is incident on a set of three lenses in air....
A collimated beam of laser light is incident on a set of three lenses in air. The first lens is diverging (fi<0) while the second and third lenses are converging (f2>0, f;>0). The first and second lenses are separated by a distance d12, while the second and third lenses are separated by a distance d23. The system is designed to take the collimated beam of laser light expand it (lens 1), recollimate it (lens 2), and then focus it to...
Figure 1 shows A fully symmetrical I beam of area A1 = 5472 mm?, and second...
Figure 1 shows A fully symmetrical I beam of area A1 = 5472 mm?, and second moment of areal = 59.9 x 10 mm' that is strengthened by attaching a plate of 10 mm thickness and 100 mm breadth at the top as shown in Figure 2. Pairs of 12 mm diameter steel bolts are used at regular 200 mm spacing along the beam to connect the plate to the I beam in an arrangement as shown in Figure 3....
1. The beam below is supported by rollers on the left side and is fixed on the right side. There is a linear distributed load along the length of the beam shown in figure (a) and the deflection of the beam is given and shown in figure (b). The figures are not drawn to scale. (x = L. y = 0) (x = 0, y = 0) (a) Length, L = 600 (cm) Youngs Modulus, E = 50,000 (KM) Area...
A laser beam ( - 632.6 nm) is incident on two slits 0.200 mm apart. How far apart are the bright interference fringes on a screen 5 m away from the double slits? cm 2. (-/10 Points) DETAILS SERCP7 24.P.002. MY NOTES PRACTICE ANOTHER In a Young's double-slit experiment, a set of parallel sits with a separation of 0.050 mm is illuminated by light having a wavelength of 593 nm and the interference pattern observed on a screen 3.50 m...
10.A narrow beam of white light is incident normally on the surface of a triangular silicate flint glass prism with one angle of 90. The index of refraction for violet light is 1.66 and for red light is 1.61. The angle in the prism is equal to 30° of glass. a. On the diagram below show an approximate sketch for the refracted light from the opposite face of the prism. Air B White light 780° Glass Calculate angular separation between...
16. A Young's double slit has a slit separation of 2.50 x 10 m on which a monochromatic light beam is directed. The resultant bright fringes on a screen 1.00 m from the double slit are separated by 2.30 x 10 m. What is the wavelength of this beam?(1 nm-10 m) a. 373 nm b, 454 nm 575 nm d. 667 nm 17. What is the minimum thickness of a glycerin film (n 1.47) on which light of wavelength 600...
An X ray beam of wavelength 77.00 pm is directed along the x axis in the positive x direction and is incident on a carbon target. Scattered X rays are detected at an angle to the x axis of pi/2 radians. For each of these scattered X rays an electron is produced with momentum component in the x direction of: 8.605 times 10^24 kg m s^-1 zero 8.342 times 10^24 kg m s^-1 8.885 times 10^24 kg m s^-1 none...
can
somebody please help me with these questions, thank you very
much
10. In Young's double-slit apparatus the slits are senerated by a distance of 0.55 x 10 m. A screen 15 located 4 m from the plane of the slits. When light of wavelength 550 nm illuminates the slits, the distance on the screen between the central bright fringe and the third bright fringe on either side is a 4x 10mb. 8x 10-m c. 12 x 10 m d...
4. (10 pts) An electron in a cathode-ray beam passes between 2.5-cm-long parallel-plate elec- trodes that are 5.0 mm apart. A 2.0 mT, 2.5-cm-wide magnetic field is perpendicular to the electric field between the plates. The electron passes through the electrodes without be- ing deflected if the potential difference between the plates is 400 V. What is the electron's speed? A. 4 x 10° m/s B. 1 x 107 m/s C. 4 x 107 m/s D. 9 x 107 m/s...
A collimated beam of laser light is incident on a set of three lenses in air. The first lens is diverging (fi<0) while the second and third lenses are converging (f2>0, f;>0). The first and second lenses are separated by a distance d12, while the second and third lenses are separated by a distance d23. The system is designed to take the collimated beam of laser light expand it (lens 1), recollimate it (lens 2), and then focus it to...
Figure 1 shows A fully symmetrical I beam of area A1 = 5472 mm?, and second moment of areal = 59.9 x 10 mm' that is strengthened by attaching a plate of 10 mm thickness and 100 mm breadth at the top as shown in Figure 2. Pairs of 12 mm diameter steel bolts are used at regular 200 mm spacing along the beam to connect the plate to the I beam in an arrangement as shown in Figure 3....
Most questions answered within 3 hours.
-
1.
A hemophiliac male mates with a healthy female. what are the
possible genotypes for the...
asked 52 seconds ago -
After reading the Primary Care scenario in the Allied Health
Community, what could have been implemented...
asked 9 minutes ago -
Calculate the change in the Gibbs energy of the system for the
following processes: a) 6.0...
asked 4 minutes ago -
A solution is prepared by dissolving 11.60 g of a mixture of
sodium carbonate and sodium...
asked 13 minutes ago -
1. Mini Case Study: Suppose that, in the future, most jobs will
be bid upon by...
asked 16 minutes ago -
Plantinga argues for the view that there is no solution to the
problem of moral evil....
asked 11 minutes ago -
For this Discussion, you examine a case study of
hearing-impaired children who developed their own language...
asked 16 minutes ago -
At the beginning of the year, Palermo Brothers, Inc., purchased
a new plastic water bottle making...
asked 14 minutes ago -
You could argue that even though Rockefeller clearly had
enormous market power (90% of the market)...
asked 15 minutes ago -
The moment of inertia of a disk rotating about its axis of
symmetry is Icm=1/2MR^2
The...
asked 23 minutes ago -
When using a relational database what makes data
formatting so important and critical to the functions...
asked 34 minutes ago -
The following temperatures show the (fictional) daily low
measured at O'Hare airport every January 1st from...
asked 54 minutes ago