==> 10 N right.
This will produce the required torque for rotational motion.
A bicycle wheel has four firecrackers attached to it on opposite ends of the wheel's diameter, as shown in the figure to the right. When the firecrackers are lit, they release heated gas away from their front ends. The bicycle wheel is pivoted against a wall by its center of mass and is free to spin. a. Which way will the bicycle wheel spin when the firecrackers are lit? Explain using the torque right hand rule. b. What is the...
Force on wheel (hrw8c11p7) A constant horizontal force of 14.0 N is applied to a wheel of mass 12.0 kg and radius 0.20 m as shown in the figure. The wheel rolls without slipping on the horizontal surface, and the acceleration of its center of mass is 0.852 m/s2. What is the magnitude of the frictional force on the wheel? Tries 0/8 What is the rotational inertia of the wheel about an axis through its center of mass and perpendicular...
A bicycle wheel has a diameter of 64.0 cm and a mass of 1.76 kg. Assume that the wheel is a hoop with all of the mass concentrated on the outside radius. The bicycle is placed on a stationary stand and a resistive force of 119 N is applied tangent to the rim of the tire. (a) What force must be applied by a chain passing over a 8.99 cm diameter sprocket if the wheel is to attain an acceleration...
A positive point charge moves into the field of a bar magnet as shown. The arrow represents the velocity of the charge. As a result of the magnetic force on the charge, what direction will the point charge be deflected? to the left to the right to the top of the screen out of the screen into the screen A positive point charge moves into the field of a bar magnet m shown. The arrow represents the velocity of the charge....
The wheel in the figure to the right has eight equally spaced spokes and a radius of 30 cm. It is mounted on a fixed axle and is spinning at 25 rev/s You want to shoot a 20-cm-long arrow paraliled to this asle and through the wheel without hit- ting any of the spokes. Assume that the arrow and spokes are very thin (a) What minimum speed must the arrow have? Does it matter where between the axle and the...
(hrw8c11p7) A constant horizontal force of 6.0 N is applied to a wheel of mass 12.0 kg and radius 0.30 m as shown in the figure. The wheel rolls without slipping on the horizontal surface, and the acceleration of its center of mass is 0.225 m/s2 What is the magnitude of the frictional force on the wheel? Submit Answer Tries 0/8 What is the rotational inertia of the wheel about an axis through its center of mass and perpendicular to...
15. Three forces are applied to a wheel of radius 0.350 m, as shown in Fig. E10.4. One force is perpendicular to the rim, one is tangent to it, and the other one makes a 40.0° angle with the radius. a. What is the net torque on the wheel due to these three forces for an axis perpendicular to the wheel and passing through its center? Figure 110.4 11.9 N 40.0° 14.6 N 5900 350 8.50N b. If the wheel...
A bicycle mechanic is checking a road bike's chain. He applies force F = 45 N to a pedal at the angle shown in (Figure 1) while keeping the wheel from rotating. The pedal is 17 cm from the center of the crank; the gear has a diameter of 16 cm. Part A What is Expres Figure < 1 of 1 Subm < Return to Op 110° OOOOOO
A bicycle mechanic is checking a road bike's chain. He applies force F = 30 N to a pedal at the angle shown in (Figure 1) while keeping the wheel from rotating. The pedal is 17 cm from the center of the crank; the gear has a diameter of 16 cm. போடு
Ask Your Teacher G My Notes SerCP11 8.4.P.044 -/2 polnts A bicycle wheel has a diameter of 64.4 cm and a mass of 1.87 kg. Assume that the wheel is a hoop with all of the mass concentrated on the outside radius. The bicycle is placed on a stationary stand and a resistive force of 121N is applied tangent to the rim of the tire. (a) What force must be applied by a chain passing over a 8.93-cm-diameter sprocket in...