Problem 2 [8 marks] A wall is composed of 75 cm of stainless steel (-17 Wm...
Steam at 150 °C flows in a stainless steel pipe which has a thermal conductivity of 16 W m-1 K -1 whose inner and outer diameters are 5 and 6 cm respectively. The pipe is covered with 3 cm think insulation having a thermal conductivity of 0.035 W m-1 K -1 . The combined convection and radiation heat transfer coefficient at the outside surface of the insulation is 20 W m-2 K -1 and the surroundings are at 10 °C....
For such aircraft application (Figure 3), a wall is made from insulation material (k-0.030 W/m.K) and the insulation material is mounted between four layers of carbon steel (2 mm thickness), the carbon layers are separated by a 2 mm air gap (kair-0.025 W/mK). Figure 3, the thermal conductivity of the carbon steel is (k-15.5 W/m.K). The temperature inside the wall is maintained at 6 °C. The environmental temperature is 24°C. The engineer would like to avoid condensation occurring at outer...
1. A steel tube [k 15 W/(m.°C)] of outside diameter 7.6 cm and thickness 1.3 cm is covered with an insulation material [k 0.2 W/(m. C)] of thickness 2 cm. A hot gas at 320°C with a heat transfer coefficient of 200 W/(m2.C) flows inside the tube. The outer surface of the insulation is exposed to cooler air at 20°C with a heat transfer coefficient of 50 W/(m2·°C). Calculate a) The heat loss from the tube to the air for...
A plane wall is composed of two materials. Material A has a uniform heat generation of 100 kW/m3, a thermal conductivity of 50 W/mK, and a thickness of 10 cm. The inner surface of material A is well insulated. The other surface of material A is connected to Material B which has no generation with a thermal conductivity of 100 W/mK and a thickness of 20 cm. The outer surface of material B is cooled by ambient air at 300...
art II- Show your work 17 Marks team at 320°C flows in a stainless steel pipe (kr 15 W/m "C) whose inner and outer diameters are 5 em and 5.5 cm, respectively. The pipe is covered with 3-cm-thick glass wool insulation (k 0.038 W m·°C). Heat is lost to the surroundings at 5°C by natural convection and radiation, with a combined natural convection and radiation heat transfer coefficient of hi-15 w/m.。C. The convective heat transfer coefficient inside the pipe to...
Heat transfer question. A large wall made of 10-cm-thick solid brick (k = 0.8 W/m.K, p 2000 kg/m3, and p 800 J/kg.K) is originally at a uniform temperature of 30°C. The wall is adiabatic (well insulated) on one side as shown in the figure. The other surface is suddenly exposed to convection air flow at 10°C, resulting in a heat transfer coefficient h=40W/m2.K. Fluid (4.1) Determine the temperature of both surfaces Gr 0 and x 10 cm) after 5 hr...
Q1) Inner surface of a side wall is used for heating of ambient-room air as shown below. There is an electrical heater with 10 W/m2 heat flux generation between a layer of insulation and 2 cm thick marble exposed to ambient-room air at T-20 °C with h-20 W/m2K. k-0.04 W/mK Marble with a thickness of 2 cm Ts= 10 ℃ outside Ambient-room air at To Electrical heating layer (negligible thickness) of temperature T-? Insulation with a thickness of 5 cm...
Heat transfer bla 5 Consider a stainless steel spoon(k = 15.1 W/m.K), partially immersed in the (4 boiling water at 95°C in a kitchen at 25°C. The handle of the spoon has a cross-section 0.2 cm x 1 cm and it extends 18 cm in the air from the free surface of the water. If the heat transfer coefficient on the exposed surface of the spoon is 15 W/m2.K, calculate the temperature difference across the exposed surface of the spoon...
A three-layer wall is constructed with the outside layer (left) being 0.1 m of stainless steel, the middle layer being 0.3 m of polypropylene, and the inside layer being 0.2 m of aluminum. Let the outside temperature far from the wall be 200 °C, and let the inside temperature far from the wall be 25 °C. The heat transfer coefficient at both walls is 0.2 W m 2K-1. 1. Calculate the steady-state temperature profile between the outer wall surface and...
Superheated steam flows steadily through steel tubing (k 35 W/m-K) applying a tube inner surface temperature of 575°C. The tubing has an inner diameter of 300 mm and a wall thickness of 30 mm. Insulation (k 0.10 W/m-K) is applied to the outer surface of the tube while thin aluminum sheet is applied around the insulation as a protective covering. The ambient air at 27°C provides a convection coefficient of 6 W/m2-K. Determine the minimum insulation thickness necessary (mm) to...