Determine the hoop stress in the 400mm diameter and 150mm wall thickness pipe shown. Also find the change in the pipe diameter. E=200Gpa
Determine the hoop stress in the 400mm diameter and 150mm wall thickness pipe shown. Also find the change in the pipe diameter. E=200Gpa
Homework Answers
Add Answer to:
Determine the hoop stress in the 400mm diameter and 150mm wall thickness pipe shown. Also find the change in the pipe diameter. E=200Gpa
Q2 A 200 mm diameter cast iron pipe with wall thickness of 15 mm is carrying water when the outle...
Q2 A 200 mm diameter cast iron pipe with wall thickness of 15 mm is carrying water when the outlet is suddenly closed. Calculate the maximmum discharge if the pressure rise is not to exceed 180 kN/m2 (a) assuming the pipe is rigid; (b) allowing for hoop stress but not longitudinal stress in the pipe wall; (c) assuming the pipe to have expansion joints throughout its length. (K-2.1 × 109 N/m 2, E 100x 109 N/m2)
Q2 A 200 mm...
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125...
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125 in. is subjected to an axial force of P = 26700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 200 psi, determine the principal stresses >n2), the maximum in-plane shear stress max, and the absolute maximum shear stress Tabs mar on the outside surface of the pipe Answers: II psi. pl psi p2...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375 in. is subjected to an axial force of P = 34000 lb and a torque of T = 9400 lb-ft, as shown. If the internal pressure in the pipe is 260 psi, determine the principal stresses (Opl > 002), the maximum in-plane shear stress Tmax, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Opl = i...
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375...
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375 in. is subjected to an axial force of P - 25700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 290 psi, determine the principal stresses (op 1>op 2 ), the maximum in-plane shear stresst max, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Op 1...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm wall thickness is fabricated...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm
wall thickness is fabricated from a 1.2 m length of spirally welded
pipe AB as shown. Tank gauge pressure is 4 MPa and centric axial
forces P and P1 of 240 kN act through rigid end plates. Determine:
(a) Net longitudinal and hoop stresses. (b) Normal stress acting
perpendicular to weld and shear stress parallel to weld (show
sketch of Mohr’s circle). (c) Determine the Factor of Safety...
A pipe with an outside diameter of 175 mm and a wall thickness of 6 mm...
A pipe with an outside diameter of 175 mm and a wall thickness of 6 mm is subjected to the loadings shown in the figure below. Р. H For this analysis, use the following values: Distances, Loads, and Moments. a = 400 mm Px = 40.5 kN Py = 68.5 kN T = 35 kN-m (a) Calculate the maximum in-plane shear stress Tmax at point Hon the outer surface of the pipe if there is no internal pressure (i.e.,p-OkPa). (Note:...
what Standard non-destructive test would be used for the following? a. Determine the wall thickness of...
what Standard non-destructive test would be used for the following? a. Determine the wall thickness of pipe b. Determine the color of a polished metal c. Determine the potential stress distribution in an engine component d. Determine thickness of paint on a metallic surface e. Find a flaw inside of a long plastic tube with a very small diameter
The steel pipe AB has a 106-mm outer diameter and a 6-mm wall thickness. Knowing that...
The steel pipe AB has a 106-mm outer diameter and a 6-mm wall thickness. Knowing that arm CD is rigidly attached to the pipe, determine the principal stresses and the maximum shearing stress at point K 53 mm 6 mm 191 mm 9.2 kN 152 mm MPa MPa MPa ? max ?min
A pipe with an outside diameter of 150 mm and a wall thickness of 5 mm...
A pipe with an outside diameter of 150 mm and a wall thickness of 5 mm is subjected to the loadings shown in the figure below. P PO a For this analysis, use the following values: Distances, Loads, and Moments. a = 450 mm Px = 11.5 kN Py = 25.5 kN T = 15 kN-m (a) Calculate the maximum in-plane shear stress Tmax at point Hon the outer surface of the pipe if there is no internal pressure (i.e.,...
A C14500 hard copper pipe has an inner radius of 0.5 in. and a wall thickness...
A C14500 hard copper pipe has an inner radius of 0.5 in. and a wall thickness of 0.125 in. If the fluid flowing through it changes the temperature of the pipe to 180°F, determine the thermal stress in the pipe. The pipe was fitted between the walls when the pipe was at 60°F. Also determine if Hooke's law is valid, if it is safe and the axial force the bar exerts on the walls. Assume the wall is rigid. 8...
Q2 A 200 mm diameter cast iron pipe with wall thickness of 15 mm is carrying water when the outlet is suddenly closed. Calculate the maximmum discharge if the pressure rise is not to exceed 180 kN/m2 (a) assuming the pipe is rigid; (b) allowing for hoop stress but not longitudinal stress in the pipe wall; (c) assuming the pipe to have expansion joints throughout its length. (K-2.1 × 109 N/m 2, E 100x 109 N/m2)
Q2 A 200 mm...
A pressurized pipe with an outside diameter of 13.7 in, and a wall thickness of 0.3125 in. is subjected to an axial force of P = 26700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 200 psi, determine the principal stresses >n2), the maximum in-plane shear stress max, and the absolute maximum shear stress Tabs mar on the outside surface of the pipe Answers: II psi. pl psi p2...
A pressurized pipe with an outside diameter of 13.1 in. and a wall thickness of 0.375 in. is subjected to an axial force of P = 34000 lb and a torque of T = 9400 lb-ft, as shown. If the internal pressure in the pipe is 260 psi, determine the principal stresses (Opl > 002), the maximum in-plane shear stress Tmax, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Opl = i...
A pressurized pipe with an outside diameter of 11.35 in and a wall thickness of 0.375 in. is subjected to an axial force of P - 25700 lb and a torque of T = 10000 lb-ft, as shown. If the internal pressure in the pipe is 290 psi, determine the principal stresses (op 1>op 2 ), the maximum in-plane shear stresst max, and the absolute maximum shear stress tabs max on the outside surface of the pipe. Answers: Op 1...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm
wall thickness is fabricated from a 1.2 m length of spirally welded
pipe AB as shown. Tank gauge pressure is 4 MPa and centric axial
forces P and P1 of 240 kN act through rigid end plates. Determine:
(a) Net longitudinal and hoop stresses. (b) Normal stress acting
perpendicular to weld and shear stress parallel to weld (show
sketch of Mohr’s circle). (c) Determine the Factor of Safety...
A pipe with an outside diameter of 175 mm and a wall thickness of 6 mm is subjected to the loadings shown in the figure below. Р. H For this analysis, use the following values: Distances, Loads, and Moments. a = 400 mm Px = 40.5 kN Py = 68.5 kN T = 35 kN-m (a) Calculate the maximum in-plane shear stress Tmax at point Hon the outer surface of the pipe if there is no internal pressure (i.e.,p-OkPa). (Note:...
The steel pipe AB has a 106-mm outer diameter and a 6-mm wall thickness. Knowing that arm CD is rigidly attached to the pipe, determine the principal stresses and the maximum shearing stress at point K 53 mm 6 mm 191 mm 9.2 kN 152 mm MPa MPa MPa ? max ?min
A pipe with an outside diameter of 150 mm and a wall thickness of 5 mm is subjected to the loadings shown in the figure below. P PO a For this analysis, use the following values: Distances, Loads, and Moments. a = 450 mm Px = 11.5 kN Py = 25.5 kN T = 15 kN-m (a) Calculate the maximum in-plane shear stress Tmax at point Hon the outer surface of the pipe if there is no internal pressure (i.e.,...
A C14500 hard copper pipe has an inner radius of 0.5 in. and a wall thickness of 0.125 in. If the fluid flowing through it changes the temperature of the pipe to 180°F, determine the thermal stress in the pipe. The pipe was fitted between the walls when the pipe was at 60°F. Also determine if Hooke's law is valid, if it is safe and the axial force the bar exerts on the walls. Assume the wall is rigid. 8...
Most questions answered within 3 hours.
-
Explain how a spinal cord injury above C3 could result in a
respiratory arrest
asked 11 minutes ago -
You are a statistician and wish to estimate, with 90%
confidence, the proportion of adults who...
asked 3 hours ago -
A man is standing 3.40 m in front of a convex spherical mirror
of radius of...
asked 3 hours ago -
Match the annual percentage rate to each of these trade credit
terms:
__ 1/5, NET 60...
asked 3 hours ago -
ORGANIC CHEMISTRY QUESTION 5
PART A--------
Describe a chemical test for the identification of a double...
asked 6 hours ago -
Both Terence and Tong work at a local actuarial consulting firm
in Des Moines.
Terence arrives...
asked 7 hours ago -
QUESTION 11
. THE RESTING POTENTIAL IS CAUSED BY
.
. A.
. the rotation of...
asked 7 hours ago -
Need them in c++
1. Give the code for the
definition of a node for
the linked implementation of
a tree that contains...
asked 6 hours ago -
For sputtering-cleaning and sputter-depositing a metal,
would you use an AC or DC plasma? Explain your...
asked 6 hours ago -
Defend ONE of the following statements:
Prices should reflect the value consumers are willing to
pay....
asked 7 hours ago -
A magnet of mass 0.10 kg is dropped from rest and falls
vertically through a 20.0...
asked 7 hours ago -
A friend approaches you about a nutritional product and ask you
if it is worth it....
asked 7 hours ago