A farmer needs to purchase a pump to bring water from a well at a rate of 4 L/s to irrigate his crops. The water table in the aquifer is at a depth 20 m below the ground surface at the extraction site. From the extraction site, water is pumped to a storage tank located 58 m above the well. Altogether, the needed piping has a length of 420 m and all lines are 5 cm plastic piping. There are many elbows, connectors, ect. with a total minor loss coefficient of 12. Assuming the pump will have an efficiency of 0.75, calculate the rated pump power the farmer needs, in kW.
A farmer needs to purchase a pump to bring water from a well at a rate...
Storage tank 18 m Pump Water is pumped from a lake to a storage tank 18 m above at a rate of 64 L/s while consuming 21.2 kW of electric power. Disregarding any frictional losses in the pipes and any changes in kinetic energy, determine (a) the overall efficiency of the pump-motor unit and (b) the pressure difference between the inlet and the exit of the pump. b) AP- a) 1 kPa
A farmer is to pump water at 70'F from a river to a water storage tank nearby using a 125-ft-long, 5-in-diameter plastic pipe with three flanged 90 smooth bends. The water velocity near the river surface is 6 ft/s, and the pipe inlet is placed in the river normal to the flow direction of water to take advantage of the dynamic pressure. The elevation difference between the river and the free surface of the tank is 12 ft. For a...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Evaluate whether the pump is adequate to deliver the desired flow rate to your house or not. Nozzle diameter = 10 cm Pump 1 Pipe diameter = 30 cm 20 m Water Pump's Brand...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Based on your evaluation, IF the pump is not sufficient to draw 70 L/s, propose a solution to solve the issue. Nozzle diameter = 10 cm Pump 1 Pipe diameter = 30 cm 20...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Suggest the most suitable pump if you were to increase/ decrease the current discharge. Refer to Table 1 for the other options of pumps that are available in the hardware store. Explain and justify...
Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 Ls. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Evaluate whether the pump is adequate to deliver the desired flow rate to your house or not. b) Based on your evaluation, IF the pump is not sufficient to draw 70 Ls, propose a solution to solve...
HELP ME URGENT! Your father installed a pump to draw water from a well to your house water tank. The desired discharge is 70 L/s. He bought a pump (Pump 1) which delivers 2 kW of power to the water from a nearby hardware store. a) Evaluate whether the pump is adequate to deliver the desired flow rate to your house or not. b) Based on your evaluation, IF the pump is not sufficient to draw 70 L/s, propose a...
3- Assume a pumped hydro energy storage arrangement that pumps up water from a low- level water reservoir to a higher-level reservoir to store energy. The water then is running back from the top reservoir down to the low reservoir through the pipe by passing a turbine. Assume a reasonable case of your choice and calculate the efficiency of this arrangement for storing energy (i.e. the electrical energy delivered by the turbine divided by the electrical energy used by the...
(100 points) Water at 25°C is pumped at a rate of 0.075m's from a reservoir 20m above a pump to a free 1. discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of Sin diameter cast iron. From the pump to the discharge the pipe...
(100 points) Water at 25°C is pumped at a rate of 0.075m'/s from a reservoir 20m above a pump to a free discharge (this means discharged to atmosphere) 35m above the pump. The pressure on the intake side of the pump is 150kPa and the pressure on the discharge side of the pump is 450kPa. The pipe between the reservoir and the pump is 3 meters of 5in diameter cast iron. From the pump to the discharge the pipe is...