A tensile test specimen has a gage length = 50 mm and diameter = 20 mm....
- A tensile test specimen has a gage length = 50 mm and diameter = 20 mm. Yielding occurs at a load of 137900. The corresponding gage length = 51 mm, which is the 0.2 percent yield point. The maximum load of 258100 N is reached at a gage length = 62.8 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength.
Homework Answers
Add Answer to:
A tensile test specimen has a gage length = 50 mm and diameter
= 20 mm....
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length...
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length = 50 mm and its cross-sectional area = 100 mm. The specimen yields at 48,000 N, and the corresponding gage length - 50.23 mm. This is the 0.2 ent yield point. The maximum load of 87,000 N is reached at a gage length 64.2 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength. (d) If fracture occurs at a gage...
A test specimen in a tensile test has a gage length of 2.0 in and an area 0.5 in". During the test the Specimen...
A test specimen in a tensile test has a gage length of 2.0 in and an area 0.5 in". During the test the Specimen yields strength of the material 64,000 lb/in . The corresponding gage length a 2.0083 in. This is the 0.2 percent yield point. The tensile strength of material 120,000 Ib/in? is reached at a gage length 2.60 in. Determine (a) load at yield point, (b) modulus of elasticity, and (c) maximum load. (d) At the point of...
Question 15 15 pts A tensile test specimen has a 2.088"gage length and 0.905" diameter. Yield...
Question 15 15 pts A tensile test specimen has a 2.088"gage length and 0.905" diameter. Yield occurs at a load of 27.808.7 lb wherein the specimen gage is 83.0 10-4"longer. This is an 0.2 percent yield point. Young's Modulus is __psi. Question 16 15 pts A tensile test specimen has a 2.0 in. gage length and 0.875 in. diameter. Yield occurs at a load of 31,000.0 lb wherein the specimen gage is 83.0 10-4 in longer. This is an 0.2...
Q1: A fiberglass composite is composed of a matrix of vinyl ester and reinforcing fibers of...
Q1: A fiberglass composite is composed of a matrix of vinyl ester and reinforcing fibers of E-glass. The volume fraction of E-glass is 31%. The remainder is vinyl ester. The density of the vinyl ester is 0.651 g/cm3, and its modulus of elasticity is 4.89 GPa. The density of E-glass is 2.685 g/cm3, and its modulus of elasticity is 71 GPa. A section of composite 1.00 cm by 25.00 cm by 200.00 cm is fabricated with the E-glass fibers running...
1.6 points) A tensile test specimen having a diameter of 10 mm and a gange length...
1.6 points) A tensile test specimen having a diameter of 10 mm and a gange length of 50 mm wa. tested to fracture. The stress-strain curve from the tension test is shown below. Labeling your points and showing the necessary steps, along with the corresponding calculations, find the following magnitudes: (a) Modulus of Elasticity, E = (b) Ultimate Strength = (e) Yield stress (0.2% offset method), (d) If the shear modulus of elasticity of the material is 28 GPa, determine...
3) A tensile test is performed on a brass specimen 10 mm in diameter and a...
3) A tensile test is performed on a brass specimen 10 mm in diameter and a length of 50 mm. When the tensile load reaches 20 kN, the material elongates 0.122 mm. What is the brass' modulus of elasticity E?
1. A tensile test was performed using a standard 0.505 in. diameter specimen (Do 0.505 in)...
1. A tensile test was performed using a standard 0.505 in. diameter specimen (Do 0.505 in) of 4140 steel with 2 inch initial gage length (Lo 2.00 in), and the following were determined: . Elastic Modulus (E)-30 x 106 psi Yield Strength (To) = 60,000 psi Strain at maximum load = 0.15 .Breaking Load (Pbreak) 15,000 lbs Maximum Load (Pa) 20,000 lbs 0 % Elongation-25% . a. (3 points) Calculate the stress at the break point: b. (5 points) Calculate...
Given the following data from a tensile test. Show your calculations for the following: Tensile Stress...
Given the following data from a tensile test. Show your
calculations for the following:
Tensile Stress
Modulus of Elasticity (Young’s Modulus)
Yield Strength
Percentage of elongation
Percentage of reduction in area
The following data were collected from a 12-mm-diameter test specimen of magnesium (l. = 30.00 mm): 250 Vielding 0.2% offset Load (N) 0 5,000 10,000 15,000 20,000 25,000 26,500 27,000 26,500 25,000 Gage Length (mm) 0.0000 0.0296 0.0592 0.0888 0.15 0.51 0.90 1.50 (maximum load) 2.10 Stress (MPa) oro...
A Grade 2 Titanium tension test specimen has a diameter of 12.60 mm and a gage...
A Grade 2 Titanium tension test specimen has a diameter of 12.60 mm and a gage length of 50 mm. In a test to fracture, load and deformation data obtained during the test are given in the accompanying table. Plot the stress strain relationship then, determine the following: (a) the modulus of elasticity. (b) the proportional limit. (c) the yield strength (0.20% offset). (d) the ultimate strength. (e) the fracture stress. (f) the true fracture stress if the final diameter...
A test bar of a metal with 12.83 mm in diameter and 50 mm gage length...
A test bar of a metal with 12.83 mm in diameter and 50 mm gage length is loaded elastically with 156 kN tensile load and is stretched by 0.356 mm. Its diameter is 12.80 mm under load. What is the elastic modulus of the metal?
Assignment 01 TOT Mechanical Properties of Materials 1. A tensile test specimen has a gage length = 50 mm and its cross-sectional area = 100 mm. The specimen yields at 48,000 N, and the corresponding gage length - 50.23 mm. This is the 0.2 ent yield point. The maximum load of 87,000 N is reached at a gage length 64.2 mm. Determine (a) yield strength, (b) modulus of elasticity, and (c) tensile strength. (d) If fracture occurs at a gage...
A test specimen in a tensile test has a gage length of 2.0 in and an area 0.5 in". During the test the Specimen yields strength of the material 64,000 lb/in . The corresponding gage length a 2.0083 in. This is the 0.2 percent yield point. The tensile strength of material 120,000 Ib/in? is reached at a gage length 2.60 in. Determine (a) load at yield point, (b) modulus of elasticity, and (c) maximum load. (d) At the point of...
Question 15 15 pts A tensile test specimen has a 2.088"gage length and 0.905" diameter. Yield occurs at a load of 27.808.7 lb wherein the specimen gage is 83.0 10-4"longer. This is an 0.2 percent yield point. Young's Modulus is __psi. Question 16 15 pts A tensile test specimen has a 2.0 in. gage length and 0.875 in. diameter. Yield occurs at a load of 31,000.0 lb wherein the specimen gage is 83.0 10-4 in longer. This is an 0.2...
1.6 points) A tensile test specimen having a diameter of 10 mm and a gange length of 50 mm wa. tested to fracture. The stress-strain curve from the tension test is shown below. Labeling your points and showing the necessary steps, along with the corresponding calculations, find the following magnitudes: (a) Modulus of Elasticity, E = (b) Ultimate Strength = (e) Yield stress (0.2% offset method), (d) If the shear modulus of elasticity of the material is 28 GPa, determine...
3) A tensile test is performed on a brass specimen 10 mm in diameter and a length of 50 mm. When the tensile load reaches 20 kN, the material elongates 0.122 mm. What is the brass' modulus of elasticity E?
1. A tensile test was performed using a standard 0.505 in. diameter specimen (Do 0.505 in) of 4140 steel with 2 inch initial gage length (Lo 2.00 in), and the following were determined: . Elastic Modulus (E)-30 x 106 psi Yield Strength (To) = 60,000 psi Strain at maximum load = 0.15 .Breaking Load (Pbreak) 15,000 lbs Maximum Load (Pa) 20,000 lbs 0 % Elongation-25% . a. (3 points) Calculate the stress at the break point: b. (5 points) Calculate...
Given the following data from a tensile test. Show your
calculations for the following:
Tensile Stress
Modulus of Elasticity (Young’s Modulus)
Yield Strength
Percentage of elongation
Percentage of reduction in area
The following data were collected from a 12-mm-diameter test specimen of magnesium (l. = 30.00 mm): 250 Vielding 0.2% offset Load (N) 0 5,000 10,000 15,000 20,000 25,000 26,500 27,000 26,500 25,000 Gage Length (mm) 0.0000 0.0296 0.0592 0.0888 0.15 0.51 0.90 1.50 (maximum load) 2.10 Stress (MPa) oro...
A Grade 2 Titanium tension test specimen has a diameter of 12.60 mm and a gage length of 50 mm. In a test to fracture, load and deformation data obtained during the test are given in the accompanying table. Plot the stress strain relationship then, determine the following: (a) the modulus of elasticity. (b) the proportional limit. (c) the yield strength (0.20% offset). (d) the ultimate strength. (e) the fracture stress. (f) the true fracture stress if the final diameter...
Most questions answered within 3 hours.
-
A χ2-curve, looking at the relationship between age and hours
spent working at an office per...
asked 11 minutes ago -
The pH of a sample of water from a river is 5.0. A
sample of effluent from...
asked 56 minutes ago -
At the beginning of the period, the Fabricating Department
budgeted direct labor of $136,500 and equipment...
asked 1 hour ago -
Please answer all
____ 28. Rent control is usually
justified on the grounds that it protects...
asked 1 hour ago -
PARTS A-D HAVE BEEN ANSWERED. WAS TOLD TO REPOST. ONLY ANSWER
PARTS E and F.
A...
asked 1 hour ago -
2) You are given the task of finding a representation for a
circle in a drawing...
asked 2 hours ago -
STUDY QUESTION: Does use of diet drug fen-phen
(fenfluramine-phentermine) cause valvular heart disease?
HINT: Valvular heart...
asked 2 hours ago -
1. An object weighing 40 N rests on a surface. The coefficient
of friction is 0.35....
asked 3 hours ago -
Investor company owns 35% of investee company voting stock and
accounts for the investment under the...
asked 5 hours ago -
The number of major faults on a randomly chosen 1 km stretch of
highway has a...
asked 5 hours ago -
Consider the competitive environment of Starbuck's, Progressive
Insurance, a manufacturing firm with low turnover, or a...
asked 6 hours ago -
3. Gains from trade
Consider two neighbouring island countries called Euphoria and
Contente. They each have...
asked 8 hours ago