Air enters a turbine in steady flow at 600 kPa, 740 K, and 120 m/s. The...
Air enters a turbine in steady flow at 600 kPa, 740 K, and 120 m/s. The exit conditions are 100 kPa, 450 K, and 220 m/s. A heat loss of 15 kJ/kg occurs, and the inlet area is 4.91 cm2 . Determine (a) the kinetic-energy change, in kJ/kg, (b) the power output, in kW, and (c) the ratio of the inlet- to outletpipe diameters
Homework Answers
Add Answer to:
Air enters a turbine in steady flow at 600 kPa, 740 K, and 120
m/s. The...
Air modeled as an ideal gas enters a turbine operating at steady state at 1040 K,...
Air modeled as an ideal gas enters a turbine operating at steady state at 1040 K, 278 kPa and exits at 120 kPa. The mass flow rate is 5.5 kg/s, and the power developed is 1200 kW. Stray heat transfer and kinetic and potential energy effects are negligible. Assuming k = 1.4, determine: (a) the temperature of the air at the turbine exit, in K. (b) the percent isentropic turbine efficiency.
Q.4 Air at 26 kPa,230 K, and 220 m/s enters a turbojet engine in flight as...
Q.4 Air at 26 kPa,230 K, and 220 m/s enters a turbojet engine in flight as shown below. The mass flow rate of air is 25 kg/s, the compression pressure ratio is 11, inlet temperature to the turbine is 1400 K, and air exits the nozzle at 26 kPa. The diffuser and nozzle processes are isentropic, but the compressor and turbine have isentropic efficiencies of 85 and 90 percent, respectively and there is no pressure drop for flow through the...
Is this process possible and why? 73 Air at 500 kPa, 980 K enters a turbine...
Is this process possible and why?
73 Air at 500 kPa, 980 K enters a turbine operating at steady state and exits at 200 kPa, 680 K. Heat transfer from the turbine occurs at an average outer surface temperature of 320 K at the rate of 40 kJ per kg of air flowing. Kinetic and potential energy effects are negligible. For air as an ideal gas with c, 1.5 kJ/kg K, determine (a) the rate power is developed in kJ...
At steady state, air at 200 kPa, 325 K, and mass flow rate of 1.0 kg/s...
At steady state, air at 200 kPa, 325 K, and mass flow rate of 1.0 kg/s enters an insulated duct having differing inlet and exit cross-sectional areas. The inlet cross-sectional area is 6 cm2. At the duct exit, the pressure of the air is 100 kPa and the velocity is 300 m/s. Neglecting potential energy effects and modeling air as an ideal gas, determine a. the velocity of the air at the inlet, in m/s. b. the temperature of the...
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature...
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature of 290 K, and with a mass flow rate of 0.72 kg/s. At the exit, the pressure is 700 kPa and the temperature is 450 K. Heat transfer from the compressor to its surroundings occurs at a rate of 3 kW. Kinetic and potential energy changes can be ignored. Determine the power input to the compressor, in kW. Assume that the air is an...
Problem-2 (200) Air at 30 kPa, 200 K, and 250 m/s enters a turbojet engine in...
Problem-2 (200) Air at 30 kPa, 200 K, and 250 m/s enters a turbojet engine in flight. The air mass flow rate is 28 kg/s. The compressor pressure ratio is 13, the turbine inlet temperature is 1460 K, and air exits the nozzle at 30 kPa. The diffuser and nozzle processes are isentropic, the compressor and turbine have isentropic efficiencies of 81% and 88%, respectively, and there is no pressure drop for flow through the combustor. Kinetic energy is negligible...
Air at 10 degree C and 80 kPa enters the diffuser of a jet engine steadily...
Air at 10 degree C and 80 kPa enters the diffuser of a jet engine steadily with a velocity of 200 m/s. The inlet area of the diffuser is 0.4 m^2.The air leaves the diffuser with a velocity that is very small compared with the inlet velocity. Determine the mass flow rate of the air and the temperature of the air leaving the diffuser. Air at 100 kPa and 280 K is compressed steadily to 600 kPa and 400 K....
A) Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 2,663 kJ/...
A) Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 2,663 kJ/kg and a mass flow rate of 0.1 kg/s. At the exit, the specific enthalpy is 1,531 kJ/kg. If there is no significant change in kinetic energy from inlet to exit, determine the rate of heat transfer between the pipe and its surroundings, in kW. B) Refrigerant 134a enters a horizontal pipe operating at steady state at 40°C, 3.1 bar and a velocity of...
Air enters a diffuser at 102 KPa , 57 Celcius , and 285 m/s and exits...
Air enters a diffuser at 102 KPa , 57 Celcius , and 285 m/s and exits at 303 kPa , 10 Celcius , and 12 m/s. The area of the inlet of the diffuser is 97 cm2. Find the mass flow rate of air (kg/s), find the area of the exit of the diffuser (cm2), find the average heat transfer time rate (kW)
Air enters a diffuser at 102 KPa , 57 Celcius , and 285 m/s and exits...
Air enters a diffuser at 102 KPa , 57 Celcius , and 285 m/s and exits at 303 KPa , 10 Celcius , and 12 m/s. The area of the inlet of the diffuser is 97 cm2. Find the mass flow rate of air (kg/s), find the area of the exit of the diffuser (cm2), find the average heat transfer time rate (kW)
Q.4 Air at 26 kPa,230 K, and 220 m/s enters a turbojet engine in flight as shown below. The mass flow rate of air is 25 kg/s, the compression pressure ratio is 11, inlet temperature to the turbine is 1400 K, and air exits the nozzle at 26 kPa. The diffuser and nozzle processes are isentropic, but the compressor and turbine have isentropic efficiencies of 85 and 90 percent, respectively and there is no pressure drop for flow through the...
Is this process possible and why?
73 Air at 500 kPa, 980 K enters a turbine operating at steady state and exits at 200 kPa, 680 K. Heat transfer from the turbine occurs at an average outer surface temperature of 320 K at the rate of 40 kJ per kg of air flowing. Kinetic and potential energy effects are negligible. For air as an ideal gas with c, 1.5 kJ/kg K, determine (a) the rate power is developed in kJ...
Air enters a compressor operating at steady state at a pressure of 100 kPa, a temperature of 290 K, and with a mass flow rate of 0.72 kg/s. At the exit, the pressure is 700 kPa and the temperature is 450 K. Heat transfer from the compressor to its surroundings occurs at a rate of 3 kW. Kinetic and potential energy changes can be ignored. Determine the power input to the compressor, in kW. Assume that the air is an...
Problem-2 (200) Air at 30 kPa, 200 K, and 250 m/s enters a turbojet engine in flight. The air mass flow rate is 28 kg/s. The compressor pressure ratio is 13, the turbine inlet temperature is 1460 K, and air exits the nozzle at 30 kPa. The diffuser and nozzle processes are isentropic, the compressor and turbine have isentropic efficiencies of 81% and 88%, respectively, and there is no pressure drop for flow through the combustor. Kinetic energy is negligible...
Air at 10 degree C and 80 kPa enters the diffuser of a jet engine steadily with a velocity of 200 m/s. The inlet area of the diffuser is 0.4 m^2.The air leaves the diffuser with a velocity that is very small compared with the inlet velocity. Determine the mass flow rate of the air and the temperature of the air leaving the diffuser. Air at 100 kPa and 280 K is compressed steadily to 600 kPa and 400 K....
Air enters a diffuser at 102 KPa , 57 Celcius , and 285 m/s and exits at 303 kPa , 10 Celcius , and 12 m/s. The area of the inlet of the diffuser is 97 cm2. Find the mass flow rate of air (kg/s), find the area of the exit of the diffuser (cm2), find the average heat transfer time rate (kW)
Most questions answered within 3 hours.
-
Let X be a continuous random variable whose PDF is Let X be a
continuous random...
asked 6 minutes ago -
Martinez Company’s relevant range of production is 7,500 units
to 12,500 units. When it produces and...
asked 4 minutes ago -
A football with a mass of 1.2 kg is kicked from ground level to
a height...
asked 10 minutes ago -
Remember: Changes in supply determinants shift supply, and
changes in demand determinants shift demand. We say...
asked 8 minutes ago -
Why is the answer b), for this question? I came up with C) for
my incorrect...
asked 14 minutes ago -
Suppose that you know that in the population of full-time
employees in the United States, the...
asked 36 minutes ago -
This experiment was designed originally to sample various meat and carcass quality
aspects of Ontario pigs...
asked 37 minutes ago -
Dopamine Hydrochloride: draw the structure And Show the
functional groups in different colors and label the...
asked 29 minutes ago -
A rope supports a 10 kg dumbbell hanging from it. What is the
tension in the...
asked 28 minutes ago -
) Raw materials are studied for contamination. Suppose that
the number of particles of contamination per...
asked 51 minutes ago -
After running a regression analysis we calculated an F test and
the significance level was 0.15....
asked 47 minutes ago -
----Can someone please help me solve this one using JAVA
----I thank you in advance
Create...
asked 51 minutes ago