A hollow rod with dout= 5 cm and din=3 cm is subject to 100N axial compresive...
A hollow rod with dout= 5 cm and din=3 cm is subject to 100N axial compresive force. Knowing E=200 GPa and G=77.2 GPa, calculate the change in its outer diameter in meter.
Homework Answers
Add Answer to:
A hollow rod with dout= 5 cm and din=3 cm
is subject to 100N axial compresive...
Q2 The truss below is made of circular steel bar with diameter 5 cm. Find the axial force for eac...
Q2 The truss below is made of circular steel bar with diameter 5 cm. Find the axial force for each member given that the steel has E-200 Gpa. Use the application posted on the Moodle F 30 kN E 3 m 3 m 60 kN 60 kN 20 kN Figure P-438
Q2 The truss below is made of circular steel bar with diameter 5 cm. Find the axial force for each member given that the steel has E-200 Gpa. Use...
this subject is about optics 412 7. A Helium-Neon (He-Ne) laser beam with diameter (Din) was...
this subject is about optics 412
7. A Helium-Neon (He-Ne) laser beam with diameter (Din) was expanded with an optical device in such a way it produces laser beam divergence with an angle of A, 2°, with respect to the original ray, and output expanded beam diameter of Dout for an L distance as shown in figure above. Using common trigonometrical rules, what is the expanded beam diameter for 5 meter distance, if He-Ne laser beam has typical beam diameter...
A 100-mm long rod has a diameter of 15 mm, Part A If an axial tensile...
A 100-mm long rod has a diameter of 15 mm, Part A If an axial tensile load of 195 kN s applied, determine its change in length. Assume linear-elastic behavior with E = 200 GPa. Express your ahswer to three significant figures and include the appropriate units. ? Suomi Request Answer Provide Feedback
Could someone help me with this problem? Thank you in advance! 4) The acrylic plastic rod...
Could someone help me with this problem? Thank you in
advance!
4) The acrylic plastic rod is 200 mm long and 15 mm in diameter. If an axial load of 250 N is applied to it, determine the change in its length and the change in its diameter. Assume the elastic modulus, E, is 2.24 GPa, and the shear modulus, G, is 870 MPa. 250 N 250 N 200 mm
Problem #1 (35 pts.) A solid 5 cm by 5 cm square aluminum rod, with a...
Problem #1 (35 pts.) A solid 5 cm by 5 cm square aluminum rod, with a 70 GPa modulus of elasticity, is stretched by an unknown axial load. The initial rod length is 1 m, and its final length (after applying the axial load) is 1.0005 m. Assume that a strain gauge (with a gauge factor of 2.2) is firmly affixed to the rod, its active axis aligned with the length of the rod. You may assume the strain gauge...
A column is fixed at the base and pinned at the top and has the hollow...
A column is fixed at the base and pinned at the top and has the hollow cross-section sketched below. The column length is I- Im and is acted at the pinned top by an axial force P-50N Calculate the parameter ? for Young's modulus E-200 GPa, and a buckling safety factor,-2 Knowing the yield (proportional) strength ?.-300 MPa, calculate the actual slenderness ratio and compare it to the critical slenderness ratio from this comparison with respect to the type of...
clear and neat please The acrylic plastic rod is 200 mm long and 15 mm in...
clear and neat please
The acrylic plastic rod is 200 mm long and 15 mm in diameter. If an axial load of 300 N is applied to it, determine the change in its length and the change in its diameter. Ep 270 GPa, vp-04. 300 N 300 N 200 mm ) Normal Stress. (5 pts) Normal Strain (Long., Lat.). (10 pts) ) Poisson's Ratio. (5 pts)
Stainless steel rod with a diameter of 15 mm and a length of 15 cm is...
Stainless steel rod with a diameter of 15 mm and a length of 15 cm is machined to a diameter of 10 mm. The spindle rotates at a revolution speed of 480 rps. And tool is travelling with an axial speed of 200 mm/min. Calculate the cutting speed, material removal rate, cutting time, power dissipated and cutting force.
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on...
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on a 300 mm length was 0.22 mm under a tensile load of 17 KN. Find the value of E. (2.5 Marks) Answer: Q2. A prismatic bar has a cross section of 25 mm x 50 mm and a length of 2m under an axial force of 90 KN. The measured elongation of the bar is 1.5 mm. Compute the tensile stress and strain in...
3. A 2.8 cm x 5.0 cm rectangular rod is stretched from its initial length of 0.4000 m to a length of 0.4005 m. The Young’s modulus of the rod material is 95 GPa. Poisson’s ratio of the rod material is...
3. A 2.8 cm x 5.0 cm rectangular rod is stretched from its
initial length of 0.4000 m to a length of 0.4005 m. The Young’s
modulus of the rod material is 95 GPa. Poisson’s ratio of the rod
material is 0.333.
A) Calculate the axial stress in units of MPa
B) Calculate the transverse strain in units of microstrain
C) A strain gauge with a strain gauge factor of 2.1 is glued to
the rod before it is stretched,...
Q2 The truss below is made of circular steel bar with diameter 5 cm. Find the axial force for each member given that the steel has E-200 Gpa. Use the application posted on the Moodle F 30 kN E 3 m 3 m 60 kN 60 kN 20 kN Figure P-438
Q2 The truss below is made of circular steel bar with diameter 5 cm. Find the axial force for each member given that the steel has E-200 Gpa. Use...
this subject is about optics 412
7. A Helium-Neon (He-Ne) laser beam with diameter (Din) was expanded with an optical device in such a way it produces laser beam divergence with an angle of A, 2°, with respect to the original ray, and output expanded beam diameter of Dout for an L distance as shown in figure above. Using common trigonometrical rules, what is the expanded beam diameter for 5 meter distance, if He-Ne laser beam has typical beam diameter...
A 100-mm long rod has a diameter of 15 mm, Part A If an axial tensile load of 195 kN s applied, determine its change in length. Assume linear-elastic behavior with E = 200 GPa. Express your ahswer to three significant figures and include the appropriate units. ? Suomi Request Answer Provide Feedback
Could someone help me with this problem? Thank you in
advance!
4) The acrylic plastic rod is 200 mm long and 15 mm in diameter. If an axial load of 250 N is applied to it, determine the change in its length and the change in its diameter. Assume the elastic modulus, E, is 2.24 GPa, and the shear modulus, G, is 870 MPa. 250 N 250 N 200 mm
Problem #1 (35 pts.) A solid 5 cm by 5 cm square aluminum rod, with a 70 GPa modulus of elasticity, is stretched by an unknown axial load. The initial rod length is 1 m, and its final length (after applying the axial load) is 1.0005 m. Assume that a strain gauge (with a gauge factor of 2.2) is firmly affixed to the rod, its active axis aligned with the length of the rod. You may assume the strain gauge...
A column is fixed at the base and pinned at the top and has the hollow cross-section sketched below. The column length is I- Im and is acted at the pinned top by an axial force P-50N Calculate the parameter ? for Young's modulus E-200 GPa, and a buckling safety factor,-2 Knowing the yield (proportional) strength ?.-300 MPa, calculate the actual slenderness ratio and compare it to the critical slenderness ratio from this comparison with respect to the type of...
clear and neat please
The acrylic plastic rod is 200 mm long and 15 mm in diameter. If an axial load of 300 N is applied to it, determine the change in its length and the change in its diameter. Ep 270 GPa, vp-04. 300 N 300 N 200 mm ) Normal Stress. (5 pts) Normal Strain (Long., Lat.). (10 pts) ) Poisson's Ratio. (5 pts)
Q1. A circular rod of 12 mm diameter was tested for tension. The total elongation on a 300 mm length was 0.22 mm under a tensile load of 17 KN. Find the value of E. (2.5 Marks) Answer: Q2. A prismatic bar has a cross section of 25 mm x 50 mm and a length of 2m under an axial force of 90 KN. The measured elongation of the bar is 1.5 mm. Compute the tensile stress and strain in...
3. A 2.8 cm x 5.0 cm rectangular rod is stretched from its
initial length of 0.4000 m to a length of 0.4005 m. The Young’s
modulus of the rod material is 95 GPa. Poisson’s ratio of the rod
material is 0.333.
A) Calculate the axial stress in units of MPa
B) Calculate the transverse strain in units of microstrain
C) A strain gauge with a strain gauge factor of 2.1 is glued to
the rod before it is stretched,...
Most questions answered within 3 hours.
-
The cell Cu(s)(1M) | Cu2+ || (1M) |
Cu(s) has E = 0.182 V
The cell...
asked 6 minutes ago -
i. y[n + 1] + 1.5y[n] = x[n]
ii. y[n + 1] + 0.8y[n] = x[n]...
asked 9 minutes ago -
A researcher is interested in students' opinions regarding an
additional annual fee to support non-income-producing varsity...
asked 13 minutes ago -
In about a paragraph or more, discuss why does a fund such as,
Invesco CEF Income...
asked 11 minutes ago -
A six-sided die is rolled 500 times. Use the CLT to approximate
the probability that the...
asked 14 minutes ago -
Water is poured into a container that has a leak. The mass m of
the water...
asked 20 minutes ago -
Shakespeare - whether you like his writing or not - is well
known for his writing...
asked 28 minutes ago -
A certain genetic characteristic of a particular plant can
appear in one of three forms (phenotypes)....
asked 45 minutes ago -
summarize Robert s. McNamara and the evolution of modern
management and the key point.
asked 43 minutes ago -
how many double bond equivalents are contained in a compound
with a molecular formula of C6H2F3I
asked 50 minutes ago -
A sample of pond sediment was diluted by placing a 0.1 g into
9.9 ml of...
asked 51 minutes ago -
A student performed an experiment using the same setup as the
one used in the lab...
asked 1 hour ago