The parameters of a 400V, 50Hz, three phase star connected induction motor are: Stator impedance ?1...
The parameters of a 400V, 50Hz, three phase star connected induction motor are: Stator impedance ?1 = 1.7 + ?4 ohm/phase Referred rotor impedance ?2 ′ = 1.2 + ?2.6 ohm/phase Magnetizing impedance ?0 = 5 + ?60 ohm/phase Determine the torque at a slip of 5% using
: a) The exact equivalent circuit
b) The approximate equivalent circuit
Homework Answers
Add Answer to:
The parameters of a 400V, 50Hz, three phase star connected
induction motor are: Stator impedance ?1...
Question 2 [10 marks) A six pole, three phase induction motor, with a star connected stator...
Question 2 [10 marks) A six pole, three phase induction motor, with a star connected stator winding is energised from a 380V, 50Hz supply. The ratio of the stator to rotor turns is assumed 1.8 and a full load slip of 4%. If the respective per phase rotor resistance and standstill reactance are 0.120 and 0.8502, determine: a. Torque developed at full load b. The maximum torque and the speed at maximum torque
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07...
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
-23 An 8-pole, 230-V, 60-Hz, A-connected, three-phase induction motor has a rotor impedance of 0.025 +...
-23 An 8-pole, 230-V, 60-Hz, A-connected, three-phase induction motor has a rotor impedance of 0.025 + 0.112/phase. The stator winding impedance is negligible. Determine (a) the speed at which the motor develops the maximum torque, (b) the maximum torque of the motor, and (c) the start- ing torque as a percentage of maximum torque. What additional resistance must be inserted in the rotor circuit to make the starting torque equal to 75% of the maximum torque?
Q3. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following equivalent circuit...
Q3. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following equivalent circuit parameters: Stator parameters: The Main winding (R =1.512, X=2.522), and the auxiliary winding (R=2.512, X=2.52), Rotor parameters referred to the stator side: (R=1N, X=1.592). The magnetizing reactance is equal to 4082. (a)Determine the standstill impedances of both windings. (b)Determine the starting torque and the starting current of the motor if it is started from rated voltage mains as a split phase induction motor. (c)Determine...
A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase equivalent circuit parameters of R1=...
A four-pole Y-connected, 415 V, 50 Hz, induction motor has phase equivalent circuit parameters of R1= 2 ohms. R2=2.2 ohms. X1=X2=4 ohms. X(motor)=90 ohms Under rated condition, the rotor slip is 6%. (i) What is the rotor speed and rotor electrical frequency under the rated conditions; (ii) Calculate the stator input current, power factor, and electromagnetic torque under these conditions; (iii) The machine is running at rated conditions and it is to be stopped by switching the two stator leads....
Problem # 3: Induction Motor Analysis [30 points] The parameters of the per phase equivalent circuit...
Problem # 3: Induction Motor Analysis [30 points] The parameters of the per phase equivalent circuit of a three phase wye-connected, 220 V (line- line, rms) 10 hp, 60 Hz, six-pole induction motor are given as: Ri = 0.3 Ohm, R2-0.15 Ohm, Xi-0.5 Ohms, X2= 0.2 Ohm, Xm-15.0 The total friction, windage and core losses add up to be a constant of 400 W. For a slip of 0.025 with motor operating at rated frequency and stator voltage, calculate the...
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the ...
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
A 415-V, Y-connected, 4-pole, 50 Hz, three-phase induction motor has the following parameters on a per-phase basis, as referred to the stator
A 415-V, Y-connected, 4-pole, 50 Hz, three-phase induction motor has the following parameters on a per-phase basis, as referred to the stator: R1 = 0.25 ohms, X1 = 0.75 ohms, R2 = 0.55 ohms, X2 = 1.2 ohms, Xm = 50 ohms. The core loss is 200 W and rotational (mechanical) losses are 200 W. The machine is running at full load at a speed of 1450 r.p.m. Using the exact equivalent circuit, calculate- The total input current, The power factor, The air-gap power developed, The...
A three-phase, six-pole 440 V, 60 Hz induction motor has the following per-phase equivalent circuit parameters...
A three-phase, six-pole 440 V, 60 Hz induction motor has the following per-phase equivalent circuit parameters referred to the stator: R1 = negligible, R’2 =0.3 Ω, Rφ = infinite, X1 = 1.131 Ω, X’2 = 1.131 Ω and Xφ = 37.7 Ω. Rotational losses are negligible. Assume the stator is connected to a 440 V, 60 Hz source and use the 6-parameters IEEE model. a) Determine the motor starting torque. (5 points) b) Calculate the motor breakdown torque. (5 points)...
4. A certain four-pole 240-V-rms 50-Hz delta-connected three-phase induction motor operates at slip 5% at full...
4. A certain four-pole 240-V-rms 50-Hz delta-connected three-phase induction motor operates at slip 5% at full load and has rotational losses (windage + friction) of 100 W. The stator resistance per phase is 0.2 Ohm. The results of no-load and locked-rotor tests on this motor are as follows: No-load test Locked-rotor test Line-to-line input voltage: 240 V 45 V Input active power: 1100 W 1300 W Input line current: 10 A 30 A Using the tests data, determine parameters of...
Question 2 [10 marks) A six pole, three phase induction motor, with a star connected stator winding is energised from a 380V, 50Hz supply. The ratio of the stator to rotor turns is assumed 1.8 and a full load slip of 4%. If the respective per phase rotor resistance and standstill reactance are 0.120 and 0.8502, determine: a. Torque developed at full load b. The maximum torque and the speed at maximum torque
A 230 V, 50 Hz, three-phase, Y-connected, 6-pole induction motor has the following per-phase parameters R-0.07 Ro 00 0.08 Ω x, x, 0.3 xm 6.33 At a slip of 2%, determine the followings using approximate equivalent circuit of the motor i) The motor speed in rev/min and rad/s. ii) The rotor current. ii) The stator current. iv) The induced torque. v) The efficiency of the motor.
-23 An 8-pole, 230-V, 60-Hz, A-connected, three-phase induction motor has a rotor impedance of 0.025 + 0.112/phase. The stator winding impedance is negligible. Determine (a) the speed at which the motor develops the maximum torque, (b) the maximum torque of the motor, and (c) the start- ing torque as a percentage of maximum torque. What additional resistance must be inserted in the rotor circuit to make the starting torque equal to 75% of the maximum torque?
Q3. A single-phase, 120 V, 60 Hz, four-pole, split-phase induction motor has the following equivalent circuit parameters: Stator parameters: The Main winding (R =1.512, X=2.522), and the auxiliary winding (R=2.512, X=2.52), Rotor parameters referred to the stator side: (R=1N, X=1.592). The magnetizing reactance is equal to 4082. (a)Determine the standstill impedances of both windings. (b)Determine the starting torque and the starting current of the motor if it is started from rated voltage mains as a split phase induction motor. (c)Determine...
Problem # 3: Induction Motor Analysis [30 points] The parameters of the per phase equivalent circuit of a three phase wye-connected, 220 V (line- line, rms) 10 hp, 60 Hz, six-pole induction motor are given as: Ri = 0.3 Ohm, R2-0.15 Ohm, Xi-0.5 Ohms, X2= 0.2 Ohm, Xm-15.0 The total friction, windage and core losses add up to be a constant of 400 W. For a slip of 0.025 with motor operating at rated frequency and stator voltage, calculate the...
1. A 15 hp, 4 pole, 208 V, 60 Hz, Y-connected, three-phase squirrel cage induction motor has the following parameters in Ω/phase referred to the stator: R,-0.220, Xi = 0.430, X,-15.0, R2 0.130 and X2-0.430. Mechanical and core losses amount to 300 W and 200 W respectively for rated voltage. (a) The motor is fed with a 60 Hz, 208 V voltage. It runs with a slip of 4.5 %. Find the speed, shaft torque and power, efficiency and power...
Most questions answered within 3 hours.
-
The English mathematician John Kerrich tossed a coin
10,000 times and obtained 5067 heads.
a. calculate...
asked 13 minutes ago -
13. Use the Student's t-distribution to find the t-value for
each of the given scenarios. Round...
asked 7 minutes ago -
Explain the nutrition assessment for the lower gastrointestinal
tract, including the components of client history, anthropometric...
asked 6 minutes ago -
1.Marc has tried to quit heroin seven times only to
relapse each and every time. Marc...
asked 14 minutes ago -
A process has an input as the flow q gal/min, and an
output temperature T Fahrenheit. Initially,...
asked 19 minutes ago -
A sample of 30 patients in a doctor's office showed that they
had to wait an...
asked 26 minutes ago -
Please write 6 to 10 paragraphs on the risks associated with
digging an underground hole.
Write...
asked 32 minutes ago -
The function x = (7.9 m) cos[(4πrad/s)t + π/3 rad] gives the
simple harmonic motion of...
asked 33 minutes ago -
A sample of steam with a mass of 0.501 g at a temperature of 100
∘C...
asked 1 hour ago -
I1(t) and I2(t) describe the intensity of two
light waves.
I1(t)= 10sin(30t+π/4)
I2(t)=
10sin(30.4t+π)
Assume that...
asked 1 hour ago -
True or False: Spinal nerves emerging from the vertebral column
are ONLY motor OR sensory.
Select...
asked 47 minutes ago -
last question i found wrong so downvoted so dont copy
paste or dont try if you...
asked 43 minutes ago