Water is to be heated from 20 ℃ to 40 ℃ as it flows through a...
Water is to be heated from 20 ℃ to 40 ℃ as it flows through a 1-cm diameter. The tube is kept at Ts=60 ℃ on the surface. Assume there’s no energy loss to the environment. If the system is requried to provide hot water at 1L/min. Determine the rate of heat transfer. Determine the length of the pipe. Assume turbulent flow if Reynolds number is larger than 2100 (this problem should have turbulent flow)
Homework Answers
All the notations used have
there usual meaning s.some data r missing but i have taken there
standard value .
Water is to be heated from 10 °C to 83 °C as it flows through a...
Water is to be heated from 10 °C to 83 °C as it flows through a 0.015 m-internal-diameter, 13-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat generated in the heater is transferred to the water in the tube. The system provides hot water at a rate of 5 L/min Assumelp...
SME 4463/SKMM 3443 Q3. (a) Water is heated from 15oC to 75°C as it flows through...
SME 4463/SKMM 3443 Q3. (a) Water is heated from 15oC to 75°C as it flows through a 2.5-cm-internal-diameter, 15-m long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady state operation all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a...
Q4 04(12%) Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 7-m-long tube. The tub...
Q4
04(12%) Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 7-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady op eration all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of...
An organic liquid is heated from 20°C to 40°C by hot water in a 1:1 pass...
An organic liquid is heated from 20°C to 40°C by hot water in a 1:1 pass shell-and- tube heat exchanger in counter-current flow. The inlet temperature of the water stream is 85oC and flows in the shell side. The organic liquid flows through a bundle of 200 tubes of outside diameter 21 mm with a wall thickness of 2 mm. The flows of the organic liquid and water are 40 kg s and 15 kg s1, respectively (a) Calculate the...
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. Th...
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. The oil has an inlet temperature of 47°C and it is desired to heat the oil to a mean temperature of 87°C at the exit of the tube. The surface of the tube is maintained at 150°C. Assuming the flow is fully developed both hydrodynamically and thermally, determine the required length of the tube. Note: by calculating Reynolds number at the entrance...
Oil of unknown properties is heated in a shell-and-tube heat exchanger with one shell pass and...
Oil of unknown properties is heated in a shell-and-tube heat exchanger with one shell pass and 20 tube passes. The oil flows through the shell, and hot water flows inside the single copper tube that has an inner diameter of 20 mm, a wall thickness of 2 mm, and a length of 3 m per pass. The water enters at 360 K at a mass flow rate of 0.2 kg/s and leaves at 300 K. The inlet and outlet temperatures...
can you solve only last 4 questions Q3. Oil of unknown properties is heated in a...
can you solve only last 4
questions
Q3. Oil of unknown properties is heated in a shell-and-tube heat exchanger with one shell pass and 20 tube passes. The oil flows through the shell, and hot water flows inside the single copper tube that has an inner diameter of 20 mm, a wall thickness of 2 mm, and a length of 3 m per pass. The water enters at 360 Kat a mass flow rate of 0.2 kg/s and leaves at...
Hi, please help me with this problem, please explain me step by step and write with very good cal...
Hi, please help me with this problem, please explain me step by step and write with very good calligraphy. Solve the next problems: * Water is heated in a horizontal tube. Water enters at a rate of 6 lbm / s and 60 ° F and is heated to 300 ° F. The water flows through an aluminum tube of 3 in diameter. The pipe is heated by an electric resistance ratio of 405Btu / h per foot of pipe...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current flow. The pipes are 3 ft long. The inside pipe is a 5/8 inch BWG 12 copper tube. The outside pipe is a 1 inch Sch 40 steel pipe. The outside pipe is insulated to minimize heat loss to the surroundings. The hot water enters the inside tube at 180F with a flow rate such that Re = 10000 The cold water flows through...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water i...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
Water is to be heated from 10 °C to 83 °C as it flows through a 0.015 m-internal-diameter, 13-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady operation all the heat generated in the heater is transferred to the water in the tube. The system provides hot water at a rate of 5 L/min Assumelp...
SME 4463/SKMM 3443 Q3. (a) Water is heated from 15oC to 75°C as it flows through a 2.5-cm-internal-diameter, 15-m long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady state operation all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a...
Q4
04(12%) Water is to be heated from 10°C to 80°C as it flows through a 2-cm-internal-diameter, 7-m-long tube. The tube is equipped with an electric resistance heater, which provides uniform heating throughout the surface of the tube. The outer surface of the heater is well insulated, so that in steady op eration all the heat generated in the heater is transferred to the water in the tube. If the system is to provide hot water at a rate of...
An organic liquid is heated from 20°C to 40°C by hot water in a 1:1 pass shell-and- tube heat exchanger in counter-current flow. The inlet temperature of the water stream is 85oC and flows in the shell side. The organic liquid flows through a bundle of 200 tubes of outside diameter 21 mm with a wall thickness of 2 mm. The flows of the organic liquid and water are 40 kg s and 15 kg s1, respectively (a) Calculate the...
(40 points) Engine oil flows at a rate of 1 kg/s through a 5-mm diameter smooth straight tube. The oil has an inlet temperature of 47°C and it is desired to heat the oil to a mean temperature of 87°C at the exit of the tube. The surface of the tube is maintained at 150°C. Assuming the flow is fully developed both hydrodynamically and thermally, determine the required length of the tube. Note: by calculating Reynolds number at the entrance...
Oil of unknown properties is heated in a shell-and-tube heat exchanger with one shell pass and 20 tube passes. The oil flows through the shell, and hot water flows inside the single copper tube that has an inner diameter of 20 mm, a wall thickness of 2 mm, and a length of 3 m per pass. The water enters at 360 K at a mass flow rate of 0.2 kg/s and leaves at 300 K. The inlet and outlet temperatures...
can you solve only last 4
questions
Q3. Oil of unknown properties is heated in a shell-and-tube heat exchanger with one shell pass and 20 tube passes. The oil flows through the shell, and hot water flows inside the single copper tube that has an inner diameter of 20 mm, a wall thickness of 2 mm, and a length of 3 m per pass. The water enters at 360 Kat a mass flow rate of 0.2 kg/s and leaves at...
Hot and cold water streams exchange heat in a double pipe heat exchanger in counter current flow. The pipes are 3 ft long. The inside pipe is a 5/8 inch BWG 12 copper tube. The outside pipe is a 1 inch Sch 40 steel pipe. The outside pipe is insulated to minimize heat loss to the surroundings. The hot water enters the inside tube at 180F with a flow rate such that Re = 10000 The cold water flows through...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
Most questions answered within 3 hours.
-
For the following reaction, 0.128 moles of
potassium hydrogen sulfateare mixed with
0.504 moles of potassium...
asked 1 hour ago -
1. What is the present value of $400, three years in the future
if the interest...
asked 1 hour ago -
The labor force minus the number of employed equals the number
of unemployed.
a. True
b....
asked 3 hours ago -
Determine the mass in units of grams [g] of 0.49 moles [mol]
of a new fictitious...
asked 4 hours ago -
A horizontal mass of M=5kg is on a spring and stretched to
x=0.5m when released from...
asked 5 hours ago -
26 of 50
"I have worked at the Arizona Humane Society for ten years, and
have...
asked 5 hours ago -
Compare and contrast zero based budgeting and incremental (or
base year) budgeting.
asked 5 hours ago -
4 pts 10. Which of the following hypothesis would be MOST
difficult to test experimentally? Group...
asked 5 hours ago -
A business owner makes 1,000 items a day. Each day he or she
contributes eight hours...
asked 5 hours ago -
A
circular loop in the plane of a paper lies inca0.65 T magnetic
field pointing into...
asked 6 hours ago -
A business owner is trying to decide whether to buy, rent, or
lease office space and...
asked 6 hours ago -
Thermal Storage Solar heating of a house is much more efficient
if there is a way...
asked 6 hours ago