A tank with a volume of 1.3m^3 contains air with a gage pressure of 350kPa. A mercury manometer is attached to the tank and is open to the atmosphere on the other end. The atmospheric pressure is 100kPa and the tank temperature is 27C. What is the height of the mercury in the manometer?
A tank with a volume of 1.3m^3 contains air with a gage pressure of 350kPa. A...
5. The gage pressure in a tank is 65 kPa. If the tank is sitting at sea level and a manometer were used to measure the pressure what would the height of the liquid column in the manometer be (in mm) if the fluid was (a) Engine Oil or (b) Mercury? 6.What is the advantage of using Mercury over water in a manometer?
Problem 03.071- Gage pressure of air A 400-L rigid tank contains 5 kg of air at 25°C. Determine the reading on the pressure gage if the atmospheric pressure is 97.5 kPa. The gas constant of air is R 0.287 kPa-m /kg-K. 3 The gage pressure iskPa
8. The figure shows a tank within a tank, each containing air. Pressure gage A, which indicates pressure inside tank A, is located inside tank B and reads 5 psig (vacuum). The U-tube Pa 14.7 psia Tank B manometer connected to tank B contains water with a column length of 10 in. Using the data shown on the figure, determine the absolute pressure of the air inside tank B and inside tank A, both in psia. The atmospheric pressure surrounding...
6 point A compressed air in a tank is at a gage pressure of 60 in of Mercury (Y=846 Ibtit). Determine the absolute pressure (psial of the air in the tank when atmospheric pressure is 14.7 ptia. Moving to another question will save this response
3.1. The gage pressure in a pipe is measured by a manometer containing mercury (density = 13 600 kg/m^3). The top of the mercury is open to the atmosphere and the atmospheric pressure is 100 kPa. If the mercury column height is 24 cm, the gauge pressure in the pipe is? [2] O 24 kPa O 76 kPa O 32 kPa 68 kPa 124 kPa
A fluid manometer is open to the atmosphere as shown in figurel. If the gage pressure of the pressurized air is 0.07MPa, find the differential height h3 if hl=60cm and h2= 45cm. Mercury SG: 13.6 Ar! Methane S6= 0.47 Gasoline 56. 0.70 Figure I
The water in a tank is pressurized by air, and the pressure is measured by a multifluid manometer as shown in Figure 1. Determine the gage pressure of air in the tank if h1=26cm, h2=45cm, and h3-58cm. The specific gravity of mercury and oil are given to be 13.6 and 0.85 respectively. AIR WATER Mercury Figure 1
2. A rigid tank contains air at a gage pressure of 100 kPa at the surface of a lake. How deep would the tank have to be submerged for the gage pressure to be 0 kPa? a. The gage pressure would not change b. The gage pressure would rise as the tank is submerged c. 8.7 m d. 10.2 m
Problem5 The water in the tank is pressurized by air, and the pressure is measured by a multi-fluid manometer as shown. Determine the gage pressure of air in the tank if h 0.25 m, h2 0.35 m, and h 0.5m AIR WATER Mercury