hydraulic lift with a 26.0 cm diameter is supporting the weight
of a 2990 kg vehicle (a large car or midsize SUV).
(a) What force must be exerted on the 2.05 cm diameter master
cylinder of this lift to support the vehicle resting on the other
cylinder, the 26.0 cm diameter cylinder of the lift itself?
Tries 0/15 |
(b) What gauge pressure must the hydraulic lines be capable of
withstanding?
hydraulic lift with a 26.0 cm diameter is supporting the weight of a 2990 kg vehicle...
What force (N) must be exerted on the master cylinder of a hydraulic lift to support the weight of a 2300.0 kg car resting on the slave cylinder? The master cylinder has a 1,70 cm diameter, while the slave's is 24.0 cm.
Pascal’s principle: What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 1800 kg car resting on the slave cylinder? The master cylinder has a 2.00 cm diameter and the slave has a 25.0 cm diameter. Pascal’s principle: A barber’s chair rests on a hydraulic piston 10 cm in diameter. The input side has a piston with cross-sectional area of 10 cm2 which is pumped on using a foot pedal. If...
A hydraulic lift has pistons that are 1 cm and 15 cm in diameter. If a force of 180 N is applied to the master cylinder, what is the largest mass that the lift can support?
The output diameter and weight of a hydraulic lift are 89 cm and 1759 kg respectively. What is the input radius if the input weight is 76 kg?
What is the largest vehicle (kg) it can lift if the diameter of the output is 29.5 cm ? Answer use 3 sig figs KHw1 PHYS 132 Problem 10.14 Constants The maximum gauge pressure in a hydraulic lift is 18.9 atm 1 atm 1.013 x 105 N/m2
How far must a 2.0-cm-diameter piston be pushed down into one cylinder of a hydraulic lift to raise an 7-cm-diameter piston by 30 cm?
QUESTION 5 Assuming bicycle tires are perfectly flexible and support the weight of bicycle and rider by pressure alone, calculate the total area of the tires in contact with the ground. The bicycle plus rider has a mass of 70 kg, and the gauge pressure in the tires is 5.4 105 Pa Express your answer in cm2 with 3 or more significant figures. QUESTION 6 How tall must a water-filed manometer be to measure blood pressures as high as 206...
A hydraulic car lift has an input piston of radius 2.00 cm and negligible weight. The output piston has a radius of 79.2 cm, and the total load on the output plungers is 18000 N. If the car (output piston) needs to be lifted 1.70 m, what volume of non-compressible hydraulic fluid must be pumped into the system?
Hvdraulic Svstem Design: A hydraulic-lift table is used to raise a ####-kg crate (the weight value-your first 2 digits and last 2 digits of your school number). It consists of a platform and two identical linkages on which hydraulic cylinders exert equal forces. (Only one linkage and one cylinder are shown.) Members EDB and CG are each of length 2a, and member AD is pinned to the midpoint of EDB. If the crate is placed on the table, so that...
)Problem 2: Hydrabc systems utlize Pascal's prnciple by transmiting pressure from one cylinder (called the primary) to another d the secondary) Since the pressures will be equal, fthe surface areas are different then the forces applied to the cylinders' pistons will be rent Suppose in a hydraulic lft, the paston of the primary cylinder has a 1.85-cm dameter and the piston of the secondary cylinder has a 22- hameter force, in newtons, must be exerted on the primary cylinder of...