Water is flowing at 2.0 m/s in a circular pipe. If the diameter of the pipe...
need help ASAP please
Water is flowing at 4.0 m/s in a circular pipe. If the diameter of the pipe decreases to 1/3 its former value, what is the velocity of the water downstream? O 12 m/s 36 m/s 1.3 m/s 16 m/s O 24 m/s
water is flowing at with speed v in a circular pipe. if the area of the pipe decreases to 1/4 its former value, what is the speed of the water downstream A) v B) 4v C) v/4 D) v/2
Water flowing through a pipe suddenly comes to a section of pipe where the pipe diameter decreases to 86% of its previous value. If the speed of the water in the larger section of the pipe was 36 m/s, which is its speed in this smaller section?
Review A water filled pipe has water flowing at v1= 6.20 m/s in a section of pipe where the diameter is d1= 19.2 cm and the pressure is known to be P1= 7.00×104 N/m2 above atmospheric pressure. 1- If the pipe carries the water 3.5 meters up hill without any change in diameter, what is the new absolute pressure within the pipe? 2- After flowing up the hill described above, the pipe narrows to 80% of its original radius, what...
Water is flowing through a 600mm diameter horizontal pipe n = 0.013 and 1000m in length. A gage pressure downstream has a reading of 16 kPa and another gage in between the ends of the pipe reads 20 kPa while on the upstream side reads 30 kPa. a. Determine the total head loss of the pipe b. Determine the velocity of flow in m/s. c. Determine the rate of discharge in liter per second.
5.16. Water is flowing in a 3-cm-diameter pipe at an average velocity of Uav 2 m/s. Assuming water density of ρ-1000 kg/m 3 and viscosity μ-10-3 N s'm2, calculate the velocity at the center of the pipe, the shear τ at the wall, and the Reynolds number. Assuming laminar flow, calculate friction coefficient C and pressure drop dp/dx.
water is flowing through a circular pipe with a radius of .3 m at 3.4 m/s. if the pupes radius tapers down to 2m, what is tge speed if water through the narrower end? m/s
Water is flowing through a horizontal pipe with an inside diameter of 8.00cm. The pipe narrows to an inside diameter of 3.75cm. Assume the water is an ideal incompressible fluid. What is the velocity of the fluid initially, v_1 (when It is flowing in the 8.00cm diameter section) if the velocity of the water in the narrow part of the pipe is measured at V_2 = 27m/s? If the initial pressure is known to be 670 kPa what is the...
1. For water at 20 C flowing through a straight smooth pipe at 0.06 m/h, the pipe diameter for which transition to turbulence will occur is approximately a. 1.0 cm b. 1.5 cm c.2.0 cm d. 2.5 cm e. 3.0 cm 2. Find the Reynold number, the roughness parameter, the friction factor f and the pressure drop for flow of water at 20 C through a 5 cm diameter pipe of roughness height E=0.5 mm if the flow rate is...
Water is flowing through a circular pipe with a radius of 0.40 mat 4.50 m/s. If the pipe's radius tapers down to 0.30 m, what is the speed of water through the narrower end? Answer in m/s.