NOTE: USE SIEDER-TATE EQUATION and USE GEANKOPLIS FOR FLUID PROPERTIES
Homework Answers
Solution :
![Dha 4 He = Р Olom. 4x10.15*0.075) m 2 (0.15 +0.0750m [MP] Repo PVDA . mon Apu u - Orka x6:1m) Corsin * 0.095m) (1964X16 xio M](http://img.homeworklib.com/questions/838325f0-1ca7-11eb-888d-195eadf7d6fb.png?x-oss-process=image/resize,w_560)
Thank you
All the best buddy please upvote
Add Answer to:
NOTE: USE SIEDER-TATE EQUATION and USE GEANKOPLIS FOR FLUID
PROPERTIES
8.85 Air at 1 atm and...
A rectangular forced air heating duct is suspended from the ceiling of a basement whose air...
A rectangular forced air heating duct is suspended from the ceiling of a basement whose air and walls are at a temperature of ∞T∞=Tsur= 5°C. The duct is 15 m long, and its cross section is 350 mm × 188 mm. (1) For an uninsulated duct whose average surface temperature is 50°C, estimate the rate of heat loss from the duct. The surface emissivity and convection coefficient are approximately 0.5 and 4 W/m2·K, respectively. (2) If heated air enters the...
2. (20%) Air at the 25 °C with a mass flow rate of m- 0.01 kg/sec...
2. (20%) Air at the 25 °C with a mass flow rate of m- 0.01 kg/sec enters a rectangular duct 0 6 em cross section and 2 m long. The duct wall is subjected to a uniform heat flux of qKw temperature of the air and the duct surface temperature at the duct outlet (A hydrod1.568 x 103 mls,Pr developed flow). Air properties to be used are:ρ-1.1774 kgm, C,-1.0057 0.708, k -0.02624 w/m-oC. 5 kw/m2. Determine the oulet ically and...
Air at 3x104 kg/s and 27°C enters a rectangular duct that is 1 m long and...
Air at 3x104 kg/s and 27°C enters a rectangular duct that is 1 m long and 4 mm by 16 mm on a side. A uniform heat flux of 600 W/m2 is imposed on the duct surface. What is the temperature of the air and of the duct surface at the outlet?
8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-...
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s,...
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s, enters a 30-mm-diameter, 5-m-long tube whose surface is at Ts - 25°C. (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is h- 3.58 W/m2...
Air enters a 23-cm-diameter 13-m-long underwater duct at 53°C and 1 atm at a mean velocity...
Air enters a 23-cm-diameter 13-m-long underwater duct at 53°C and 1 atm at a mean velocity of 7 m/s, and is cooled by the water outside. If the average heat transfer coefficient is 85 W/m2 °C and the tube temperature is nearly equal to the water temperature of 5°C, determine the exit temperature of air and the rate of heat transfer. Use Table A-15 for the properties of air at the anticipated average temperature of 30°C. Answer in Watts. please...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square,...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL = NT = 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL = 60 mm and ST-42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts - 390 K may be assumed to be maintained as condensation occurs...
Air at a temperature Tm, i = 20°C and p = 1 atm enters a 25-mm...
Air at a temperature Tm, i = 20°C and p = 1 atm enters a 25-mm diameter, 1.75 m tube with a mass flow rate of 6 x 10-4 kg/s. A constant heat flux warms the air so that its exit mean temperature is Tm, 0 = 50°C. Find the required heat flux and wall surface temperature at the outlet. Assume fully developed flow. Step 1 What is the heat rate transfer to the air from the tube, in W?...
Problem 3 (20 points) A cross-flow heat exchanger consists of a bundle of 32 tubes in a long duct. Hot water at 150°C and a mean velocity of 0.5 m/s enters the tubes having inner and outer diameters...
Problem 3 (20 points) A cross-flow heat exchanger consists of a bundle of 32 tubes in a long duct. Hot water at 150°C and a mean velocity of 0.5 m/s enters the tubes having inner and outer diameters of 10.2mm and 12.5mm and has to be cooled to 136°C. The tubes are made of steel of thermal conductivity k-40 W/m.K. Air at 10°c enters the exchanger (unfinned) with a volumetric flow rate of 1.0 m3/s. The convective heat transfer coefficient...
Consider a cross-flow heat exchanger with a surface area of 10 m². The cold fluid has...
Consider a cross-flow heat exchanger with a surface area of 10 m². The cold fluid has a heat capacity rate of 2310 W/K and inlet and outlet temperatures of 25°C and 150°C respectively. The hot fluid has a heat capacity rate of 2000 W/K and an inlet temperature of 325°C. If the cold fluid can be considered mixed and the hot fluid unmixed, find the overall heat transfer coefficient, u, in W/m2.K, and the outlet temperature, in °C, of the...
2. (20%) Air at the 25 °C with a mass flow rate of m- 0.01 kg/sec enters a rectangular duct 0 6 em cross section and 2 m long. The duct wall is subjected to a uniform heat flux of qKw temperature of the air and the duct surface temperature at the duct outlet (A hydrod1.568 x 103 mls,Pr developed flow). Air properties to be used are:ρ-1.1774 kgm, C,-1.0057 0.708, k -0.02624 w/m-oC. 5 kw/m2. Determine the oulet ically and...
Air at 3x104 kg/s and 27°C enters a rectangular duct that is 1 m long and 4 mm by 16 mm on a side. A uniform heat flux of 600 W/m2 is imposed on the duct surface. What is the temperature of the air and of the duct surface at the outlet?
part b only please8.12 Dry, compressed air at Tm,i 75°C, p- 1o atm, with a mass flow rate of a 30-mm-diameter, 5-m-long tube whose surface is at T, 25°C. 0.001 kg/s, enters (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is...
8.12 Dry, compressed air at Tm.i75°C, p-10 atm, with a mass flow rate of 0.001 kg/s, enters a 30-mm-diameter, 5-m-long tube whose surface is at Ts - 25°C. (a) Determine the thermal entry length, the mean temperature of the air at the tube outlet, the rate of heat transfer from the air to the tube wall, and the power required to flow the air through the tube. For these conditions the fully developed heat transfer coefficient is h- 3.58 W/m2...
Problem 7.075 An air-cooled steam condenser is operated with air in cross flow over a square, in-line array of 400 tubes (NL = NT = 20), with an outside tube diameter of 20 mm and longitudinal and transverse pitches of SL = 60 mm and ST-42 mm, respectively. Saturated steam at a pressure of 2.455 bars enters the tubes, and a uniform tube outer surface temperature of Ts - 390 K may be assumed to be maintained as condensation occurs...
Air at a temperature Tm, i = 20°C and p = 1 atm enters a 25-mm diameter, 1.75 m tube with a mass flow rate of 6 x 10-4 kg/s. A constant heat flux warms the air so that its exit mean temperature is Tm, 0 = 50°C. Find the required heat flux and wall surface temperature at the outlet. Assume fully developed flow. Step 1 What is the heat rate transfer to the air from the tube, in W?...
Problem 3 (20 points) A cross-flow heat exchanger consists of a bundle of 32 tubes in a long duct. Hot water at 150°C and a mean velocity of 0.5 m/s enters the tubes having inner and outer diameters of 10.2mm and 12.5mm and has to be cooled to 136°C. The tubes are made of steel of thermal conductivity k-40 W/m.K. Air at 10°c enters the exchanger (unfinned) with a volumetric flow rate of 1.0 m3/s. The convective heat transfer coefficient...
Consider a cross-flow heat exchanger with a surface area of 10 m². The cold fluid has a heat capacity rate of 2310 W/K and inlet and outlet temperatures of 25°C and 150°C respectively. The hot fluid has a heat capacity rate of 2000 W/K and an inlet temperature of 325°C. If the cold fluid can be considered mixed and the hot fluid unmixed, find the overall heat transfer coefficient, u, in W/m2.K, and the outlet temperature, in °C, of the...
Most questions answered within 3 hours.
-
Passive investiment are alos called:
A)microcredit B) Derivatives C) Sustainability indices D)
SDGs
which option is...
asked 9 minutes ago -
Write about the Foreign Exchange Market. Describe the functions
of the foreign exchange market
asked 9 minutes ago -
10. You performed an RT-qPCR experiment to get the following Cq
values:
Ct values
Before food...
asked 10 minutes ago -
Bob is moving away from Alice with speed of 0.5c. Carlos is
moving away from Alice...
asked 32 minutes ago -
Interpret the following regression model:
Repairs = 0.33 + 0.312 New Cars + 0.71 Used...
asked 30 minutes ago -
Explain the principle of DC converter operation with (a)
resistive and (b) RL load using appropriate...
asked 31 minutes ago -
All of the following statements are true regarding the LIFO
reserve except:
Select one:
a. Companies...
asked 37 minutes ago -
Discuss the predicament that a safety professional faces knowing
that some OSHA regulations are outdated and...
asked 37 minutes ago -
Suppose the times (in hours) that it took for a tax preparer to
complete 15 randomly...
asked 37 minutes ago -
A 30-kg box is at rest on a horizontal floor with friction
coefficients μs = 0.65...
asked 39 minutes ago -
Erwin Schrödinger’s proposal regarding the
characteristics of electrons behavior, (What he meant
by wave like behavior...
asked 47 minutes ago -
Four years ago, your firm issued $1,000 par, 25-year bonds, with a
7 percent coupon rate...
asked 49 minutes ago