A1 (driving gear) has 40 teeth and A2 (driven gear) has 82 teeth. If A1 rotates...

Question

Question

Answer 1

Answer #1

degree of rotation of A2 / degree of rotation of A1 = 1/Gear ratio = 40/82 __________________ eq.1

=> Degree of rotation of A2 = 10*40/82 = 4.878 degrees ________________________ Answer

Answer 2

Similar Homework Help Questions

An input (driving) gear with 60 teeth is connected to an output (driven) gear with 45...

An input (driving) gear with 60 teeth is connected to an output (driven) gear with 45 teeth. Calculate the reduction ratio.
5. A 5 cm diameter gear is driven by a1 cm gear that rotates at 1...

5. A 5 cm diameter gear is driven by a1 cm gear that rotates at 1 revolution per second. The 1 cm gear stalls at a torque of 1 N m. What is the stall torque of the 5 cm gear?
16 The planetary gearset shown has a sun gear with 40 teeth, and idler planet gear...

16 The planetary gearset shown has a sun gear with 40 teeth, and idler planet gear with 20 teeth, and the follower gear with 30 teeth. The arm rotates at a constant speed of 100 rpm clockwise. Determine the rotation speed and direction of the follower. M-40

Question 1 In the epicyclic gear shown in Figure Q1 the Annulus A1 and the Sun...

Question 1 In the epicyclic gear shown in Figure Q1 the Annulus A1 and the Sun wheel S2 are compound, the Sun wheel Si rotates with the input shaft and both Planet cages rotate with the output shaft. The numbers of teeth on the o wheels are Si=24, A1=72, Sz=40 and A2=80. (1) Find the gear ratio of the system when the Annulus A1 is held fixed. S Find the gear ratio of the system when the Figure Q1 Annulus...
c-100 FIXED PROBLEM 1 In the planetary gear train shown above, the arm is driven at...

c-100 FIXED PROBLEM 1 In the planetary gear train shown above, the arm is driven at 10 RPM clockwise. Number of teeth is indicated for each gear. What is the speed of gear D and in which direction? (sun gear A is fixed to ground and does not rotate).
1. A two-stage compound gear is driven by a 20-hp motor that rotates the shaft 'a'...

1. A two-stage compound gear is driven by a 20-hp motor that rotates the shaft 'a' in CCW as shown in the figure at a speed of 100 rpm. Entire gear set has a diametral pitch of 4 teeth/in and a pressure angle of 20°. The tooth numbers are: N2 = 48, N3 = 72, N4 = 48, and Ns = 120. 5 С a 3 a. Draw the free body diagram of the compound gear 3 and 4 mounted...

The top half of a compound epicyclic gear set is as shown in Figure Q2. If...

The top half of a compound epicyclic gear set is as shown in Figure Q2. If the input shaft I rotate at dockwise direction at a speed of 1,200 rpm and gear Al is set as the output, determine the following. (a) The output speed Nal when gear X rotates counter-clockwise direction at the speed of 3,000 rpm. (b) The magnitude and direction of the torque required to lock gear X if 300 Nm torque is applied on input shaft...
A compound epicyclic gear train is shown in the Figure. The shaft P is driven at...

A compound epicyclic gear train is shown in the Figure. The shaft P is driven at 2500 rpm in the clockwise direction by a motor of power rating 8 kW. The sun S2 is fixed. The number of teeth in the gears are S1, 34; S2, 21; A1, 86 and A2, 73. Determine The magnitude and direction of the angular velocity of the shaft Q and The torque required to fix the sun, S2 A, Q P S, 5,
i) Determine the gear ratio and transfer function for the gear train between the driver gear...

i) Determine the gear ratio and transfer function for the gear train between the driver gear (gear 1) and the driven gear (gear 4). Assume that gear 1 has 10 teeth, gear 4 has 40 teeth, the large compound gear (gear 2) has 30 teeth, and the small compound gear (gear 3) has 15 teeth (Figure 2). ii) If gear 4 has 60 teeth and the large compound gear has 45 teeth determine the gear ratio and the transfer function...

Answer given is No=-143rpm (in opposite direction to A) A compound epicyclic gear is as shown...

Answer given is No=-143rpm (in opposite direction to A) A compound epicyclic gear is as shown in Figure 4.9. Ai and S2 form a compound wheel, which rotates freely on shaft O. The Planet wheels P1 and P2 rotate on pins fixed in arms attached to shaft O. and A2 have internal teeth: the others have external teeth, with the following numbers, tsi=40; tp1=30 ; tpz=20; ts2=50. If Si rotates at 500 rpm and wheel Az is fixed, find the...