JUST PART E VOLTAGE REGULATION PLEASE!!
JUST PART E VOLTAGE REGULATION PLEASE!! 2) The series impedance referred to the HV side of...
Q1 A single-phase 11/2.2 kV, 22 kVA transformer has the following parameters all referred to the HV side RI 0.4, X 0.602, R2 7.5 , X2 22 , Re 2500 , and Xm - 20002 The transformer is supplying 80% of its rated load at a power factor of 0.87 power factor lagging and at its rated voltage. Calculate (a) the efficiency of the transformer, (b) the power losses on the primary side (the copper loss and core loss), and...
(a) Describe the tests carried out on a single-phase transformer to determine its equivalent circuit parameters and explain how each parameter is determined based on the test results. (b) A 2200/220 V, 15 kVA, single phase transformer has the following equivalent circuit parameters: The HV winding resistance and leakage reactance are 0.2Ω and 0.3Ω respectively. The LV winding resistance and leakage reactance are 0.012Ω and 0.03 Ω respectively. The magnetic circuit resistance and reactance referred to the HV side are...
lI. A single-phase 100 KVA, 2000/200 V transformer has the following test results Open-circuit (OC) test (LV side): 200 V, 8,0 A, 600 W Short-Circuit (SC) test (HV side): 100 V,50 A, 2000 W a. Determine the approximate equivalent circuit referred to the HV side. b. Find the voltage regulation at full-rated current delivering rated voltage and PF of 0.8 lagging. c. Calculate efficiency of transformer d. Assume that, voltage at HV side is 2000 V. Calculate the voltage at...
Q1: A 20-kVA 8000/480-V distribution transformer has the following resistances and reactances: Rp 322 X,-45 Ω R,-0.05 Ω X,-0.06 Ω The excitation branch impedances are given referred to the high-voltage side of the transformer. (a) Find the equivalent circuit of this transformer referred to the high-voltage side. (b) Assume that this transformer is supplying rated load (20kVA) at 480 V and 0.8 PF lagging. What is this transformer's input voltage? What is its voltage regulation? (c) What is the transformer's...
Electric Machines Problem 1 (40 points) The following data were obtained for a 20 kVA,60 H z, 2400/240 V distribution transformer tested at 60 Hz: HV open circuited: Voc 240 V, loc 1.038 A, Poc 122 W LV short circuited: Vc 61.3 V,Is8.33 A, Pc 257 W 1) Find the parameters of the transformer and equivalent circuit referred to LV side 2) Find voltage regulation when the transformer oper ates as step down and delivers its rated kVA at rated...
EMM2802 MAYIJUNE 2016 QUESTION B A single phase transformer has a high voltage to low voltage ratio of 10. The following parameters are referred to low voltage side, with a supply of 200V. Equvalent Impedance referred to low woltage side Zev 0.1+jo.s a Load impedance referred to low voltage side R-4000 X-2310 Magnetizing Branch referred to low voltage side Draw an approximate equivalent circut with the given parameters and determine the following: 81 The magnetizing current (), the core loss...
A three phase power transformer of 100 (KVA), 22 / 12.7 (kV) and Δ-Y has a resistance of 0.15 (pu) and a reactance of 0.6 (pu). The elements of the excitation branch are R_m = 100 (pu) and X_m = 20 (pu) a) If this transformer supplies a load of 80 (KVA) with an FP = 0.8 delay, draw the phasor diagram of one phase of the transformer. b) What is the voltage regulation of the transformer bank in these...
Problem 3 A 50-Hz transformer is operated from a 60 Hz supply. Assume that the load does not change. Discuss the corresponding effects on its flux, reactive power requirements, losses, and efficiency. а- [5 Points] A 50-kVA, 2400/240 V, 60-Hz, single-phase distribution transformer has the following equivalent circuit parameters referred to the high-voltage side Xea 3.0 Req= 0.5 Xm 4,500 S2 Use the equivalent Cantilever model circuit shown in Figure (1). Assume that the load on the secondary of the...
Problem # 2-A single phase, 60 Hz, 10 KVA, 440110 V has the following parameters: R1=0.15 R2=0.0086 X1=0.5 X2-0.0286 Re and Xmare 1500 and 1000 referred to the high voltage side. Using the approximate equivalent circuit, Calculate the transformer no load current, power factor and power when terminal voltage is 470 a- V. What would these values be if the transformer were ideal? Calculate the transformer output power and efficiency when load of 1.6+j1.2 ohms is connected b- to its...
Problem # 2-A single phase, 60 Hz, 10 KVA, 440/ 110 V has the following R1 0.15 R 0.0086X 0.5 X 0.0286 Re and Xnare 1500 and 1000 referred to the high voltage side Using the approximate equivalent circuit, Calculate the transformer no load power a- current, power factor and power when terminal voltage is 470 V. What would these values be if the transformer were ideal? b Calculate the transformeroutput power and eficiency when load of 1.6+j1.2 ohms is...