Homework Answers
Add Answer to:
1 out of 2 attempt Steam flows steadily through a turbine at a rate of 53,500...
Steam flows steadily through a turbine at a rate of 20,000 kg/h, entering at 6.5 MPa...
Steam flows steadily through a turbine at a rate of 20,000 kg/h, entering at 6.5 MPa and 500 C, and leaving at 60C as saturated water. If the power generated by the turbine is 40 MW, determine the heat loss from the turbine.
Steam flows steadily through a turbine at a rate of 45,000 lbm/hr, entering at 1,000 lbf/in2...
Steam flows steadily through a turbine at a rate of 45,000 lbm/hr, entering at 1,000 lbf/in2 and 900oF and leaving at a pressure of 5 lbf/in2. If the power generated by the turbine is 1.37x107 Btu/hr and the turbine is cooled at a rate of 7x106 Btu/hr, determine the temperature of the steam at the exit [oF]. Show the inlet and exit states on a P-v diagram.
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C...
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
3) Steam expands in a turbine steadily at a rate of 25,000 kg/hour) entering at 6...
3) Steam expands in a turbine steadily at a rate of 25,000 kg/hour) entering at 6 MPs and 450°C and leaving at 20 kPa as a saturated vapor. If the power generated by the turbine is 4 MW determine the rate of entropy generation for this process. Assume the surrounding medium is at 25°C
A ship's steam turbine receives 7200 lbm/min of steam at pressure of 900psia and a velocity...
A ship's steam turbine receives 7200 lbm/min of steam at pressure of 900psia and a velocity of 100ft/s. The steam leaves the turbine at 450 psia with a velocity of 800 ft/s. Specific enthalpy at the inlet and exit, respectively, are 1508.9 Btu/lbm and 1238.5 Btu/lbm. As the steam passes through turbine 12 Btu/lbm of heat is lost to the environment. a) Using the Steady Flow Energy Equation, determine the specific work generated by this turbine. (Btu/lbm) b) Determine the...
Steam flows steadily through an adiabatic turbine
Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s, and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine a. (3) Change in kinetic energy (-23.4 kJ) b. (4) Power output (12.12 MW) c. (3) Turbine inlet area (0.012966 m2)
Steam flows through a turbine at a rate of 19.3 kg/s. It enters the turbine at...
Steam flows through a turbine at a rate of 19.3 kg/s. It enters the turbine at 500°C and 5 MPa and leaves at 250°C and 500 kPa If the turbine is operated adiabatically, what is the power produced by the turbine? MW It is discovered that this turbine only produces 6.581 MW of power, what is rate of energy loss due to heat transfer? kW Given the actual rate of work supplied by the turbine, what is the efficiency of...
Problem 1 - Gas Turbine Engine. Assume the gas turbine engine operates on basic non-ideal Brayton...
Problem 1 - Gas Turbine Engine. Assume the gas turbine engine operates on basic non-ideal Brayton cycle with the following specifications Inlet Condition: Dry air at 537 R and 14.7 psia Pressure Ratio: 24.2 Actual Exhaust Temperature: 950 F Compressor and Turbine Efficiency: 85% Actual Power Output 34 MW Using given/assumed values, determine: a) firing temperature, b) cycle efficiency, c) air mass flow rate. Problem 2- HRSG. Assume the HRSG is used to produce saturated steam at 600 psia using...
1. An industrial plant needs 20,000 lbm of saturated steam at 280°F per hour for heating...
1. An industrial plant needs 20,000 lbm of saturated steam at 280°F per hour for heating purposes and ten MW of electrical power. A small turbine system is to be designed to handle both of these needs. Steam is supplied to a turbine at 400 psia pressure from a boiler and expanded until 280°F saturated steam is obtained whereupon the steam needed for heating is extracted. The rest of the steam is expanded in a second turbine to a condenser...
2. Ideal Rankine cycle. The condenser pressure is 4 psia. Steam goes into turbine at 1100F...
2. Ideal Rankine cycle. The condenser pressure is 4 psia. Steam goes into turbine at 1100F and 1300 psia. The mass flow rate of steam is 2,000,000 lb/h. Cooling water from a lake flows through the condenser at 95,000,000 lb/hr and comes into the condenser at 63F. Determine: a) The net power made (BTU/h) b) Rate of heat transfer in the condenser (BTU/h) c) Overall thermal efficiency (%) d) The outlet temperature of the cooling water (F)
1. Water enters the constant 130-mm inside-diameter tubes of a boiler at 7 MPa and 65°C and leaves the tubes at 6 MPa and 450°C with a velocity of 80 m/s. Calculate the velocity of the water at the tube inlet and the inlet volume flow rate. [5-14] 2. Air enters a nozzle steadily at 50 psia, 140°F, and 150 ft/s and leaves at 14.7 psia and 900 ft/s. The heat loss from the nozzle is estimated to be 6.5...
3) Steam expands in a turbine steadily at a rate of 25,000 kg/hour) entering at 6 MPs and 450°C and leaving at 20 kPa as a saturated vapor. If the power generated by the turbine is 4 MW determine the rate of entropy generation for this process. Assume the surrounding medium is at 25°C
Steam flows steadily through an adiabatic turbine. The inlet conditions of the steam are 4 MPa, 500°C, and 80 m/s, and the exit conditions are 30 kPa, 92 percent quality, and 50 m/s. The mass flow rate of the steam is 12 kg/s. Determine a. (3) Change in kinetic energy (-23.4 kJ) b. (4) Power output (12.12 MW) c. (3) Turbine inlet area (0.012966 m2)
Steam flows through a turbine at a rate of 19.3 kg/s. It enters the turbine at 500°C and 5 MPa and leaves at 250°C and 500 kPa If the turbine is operated adiabatically, what is the power produced by the turbine? MW It is discovered that this turbine only produces 6.581 MW of power, what is rate of energy loss due to heat transfer? kW Given the actual rate of work supplied by the turbine, what is the efficiency of...
Problem 1 - Gas Turbine Engine. Assume the gas turbine engine operates on basic non-ideal Brayton cycle with the following specifications Inlet Condition: Dry air at 537 R and 14.7 psia Pressure Ratio: 24.2 Actual Exhaust Temperature: 950 F Compressor and Turbine Efficiency: 85% Actual Power Output 34 MW Using given/assumed values, determine: a) firing temperature, b) cycle efficiency, c) air mass flow rate. Problem 2- HRSG. Assume the HRSG is used to produce saturated steam at 600 psia using...
1. An industrial plant needs 20,000 lbm of saturated steam at 280°F per hour for heating purposes and ten MW of electrical power. A small turbine system is to be designed to handle both of these needs. Steam is supplied to a turbine at 400 psia pressure from a boiler and expanded until 280°F saturated steam is obtained whereupon the steam needed for heating is extracted. The rest of the steam is expanded in a second turbine to a condenser...
2. Ideal Rankine cycle. The condenser pressure is 4 psia. Steam goes into turbine at 1100F and 1300 psia. The mass flow rate of steam is 2,000,000 lb/h. Cooling water from a lake flows through the condenser at 95,000,000 lb/hr and comes into the condenser at 63F. Determine: a) The net power made (BTU/h) b) Rate of heat transfer in the condenser (BTU/h) c) Overall thermal efficiency (%) d) The outlet temperature of the cooling water (F)
Most questions answered within 3 hours.
-
Evelyn incorporates her sole proprietorship, transferring it to
newly formed Papaya Corporation. The assets transferred have...
asked 10 seconds from now -
A
752 mL sample of water was placed in a 1000 gram pan of aluminum.
The...
asked 1 minute ago -
1 point) Given the significance level α=0.01 find the following:
(a) left-tailed z value z= (b)...
asked 2 minutes ago -
Calculate the expected value, the variance, and the standard
deviation of the given random variable X....
asked 4 minutes ago -
Assume that in a hydrogen atom, the electron circles the nucleus
in a circle of radius...
asked 8 minutes ago -
Describe two obstacles that makes fixing atmospheric nitrogen
difficult.
asked 13 minutes ago -
T
F 53) Most differences
between human groups are the result of biology rather than
culture....
asked 17 minutes ago -
A 5.20 mW helium neon laser emits a visible laser beam with a
wavelength of 633...
asked 20 minutes ago -
Assignment:
Your
organization has made a strategic decision
to
outsourcework
currently performed in house. You have...
asked 19 minutes ago -
A hospital performs 100 surgeries per week. The probability that
complications after surgery occur is 10%....
asked 20 minutes ago -
In preparing its cash flow statement for the year ended December
31, 2018, Green Co. gathered...
asked 22 minutes ago -
Donna is 18 years old and full time accounting student.She is
saving for an overseas holiday...
asked 22 minutes ago