Exercise III: Consider the following gear set: Consider the following gear set: Find the speed, gear,...

Question

Question

Answer 1

Answer #1

Giren dola Teeth on Driver, T,=8 Teeth on driven, T2 = 40 Gear Ratio = Humber of teeth on Drives gear Number of teeth on Driv

Answer 2

Similar Homework Help Questions

estion- a) Find the speed ratio of the gear train shown in figure. What will be...

estion- a) Find the speed ratio of the gear train shown in figure. What will be the direction of gear 7 b) Determine pitch line velocity (v r.w) of gear &, provided for gear 6 Imodule (D/T) 5mm e) If double the speed ratio (as calculated in a) is required with a simple gear train (having only two gears) number of teeth on driven gear, provided input gear has 20 teeth. IST IST 25T 33T I8T An epicyclic gear train...
2. Consider the triple speed reduction gear box shown in Figure 1. All the gears are...

2. Consider the triple speed reduction gear box shown in Figure 1. All the gears are made with a diametral pitch of 16 in. The input of the gear train is gear A, and the output is gear G. The gear train transmits an input toque of 250 lb-in, at a speed of 2,500 rpm clockwise. The number of teeth on each gear is given as follows: NA 24 teeth, Na = 60 teeth, Nc 20 teeth, No 58 teeth,...
The top half of a compound epicyclic gear set is as shown in Figure Q2. If...

The top half of a compound epicyclic gear set is as shown in Figure Q2. If the input shaft I rotate at dockwise direction at a speed of 1,200 rpm and gear Al is set as the output, determine the following. (a) The output speed Nal when gear X rotates counter-clockwise direction at the speed of 3,000 rpm. (b) The magnitude and direction of the torque required to lock gear X if 300 Nm torque is applied on input shaft...

i) Determine the gear ratio and transfer function for the gear train between the driver gear...

i) Determine the gear ratio and transfer function for the gear train between the driver gear (gear 1) and the driven gear (gear 4). Assume that gear 1 has 10 teeth, gear 4 has 40 teeth, the large compound gear (gear 2) has 30 teeth, and the small compound gear (gear 3) has 15 teeth (Figure 2). ii) If gear 4 has 60 teeth and the large compound gear has 45 teeth determine the gear ratio and the transfer function...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5...

2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. e) What is the transmitted force between Gears 1 and 2, in lbf? f) What is the torque of Gear 1, in in-lbf? g) What is the torque of Gear 2? h) The torque of Gear 2 and 3 are the same. What is the torque of Gear...
2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5...

2. Gear dynamics. The gear train above is driven on the input shaft with a 0.5 hp electric motor. All of the gears have a diametral pitch of 8 teeth per inch. i) What is the ratio of output torque (Gear 4) to input torque (Gear 1)? j) Is it a coincidence that it is the same as the answer in 1 An input shaft drives Gear 1 with 20 teeth at 1800 rpm which mates with the 80-tooth Gear...

please solve and show work HH 2. Given a compound gear box in figure 1, where;...

please solve and show work HH 2. Given a compound gear box in figure 1, where; a. Gear A = 40 Teeth, input rpm is 1250 rpm. b. Gear B = 160 Teeth, C. Gear C = 30 Teeth d. Gear D = 90 Teeth. Input Torque is 50 N.m., Efficiency is 75% Find the output speed, direction relative to input, power, & Holding Torque. HI B D
** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in...

** Not Multiple Choice Section ** 11. [25 points] Consider the planetary gear train shown in the figure. * Gear E is the driver running at +100 rpm. The Arm (link A) is the output driven link. The ring gear B is fixed. The number of teeth given as: are NE 34 ND 17 Nc 26 a) Determine the number of teeth for the ring gear B. All gears use the same pitch b) Determine the rpm and the direction...
In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is...

In a gear set consists of 15-tooth pinion driving a 40-tooth gear. The diametral pitch is 2. The pressure angle is 25° calculate the following A. The tooth thickness for the gear and for the pinion. B. If the pinion is rotating with an angular velocity of 700 rpm and a torque of 800 lbf.in. is being applied on the shaft of the pinion then calculate the following The power generated by the output shaft of the driven gear (Efficiency-100%)....

please show all work 3. Given an Epicyclic gearbox that has a fixed outer gear “C”,...

please show all work 3. Given an Epicyclic gearbox that has a fixed outer gear “C”, with 400 Teeth, Planet gears have 40 Teeth, the input is Arm “A”, and the output is sun gear “D”. Given that the input torque is 40 N.m., input speed of 1200 rpm and the efficiency of the gearbox is 80%. Calculate the number of teeth on the sun gear and the ratio of the gearbox. Also Calculate the Fixing Torque.