3. A 20 cm diameter cooking is over a heater boiling water at 100°C. The bottom...
10. The bottom of a glass pan containing 6.3 kg of water is 1.4 cm thick and is resting on a hot stove. The area of the bottom of the pan is 1250 cm2. At the instant the water inside the pan is at 27°C, the rate of change of he temperature of the water is measured at 2.0 C° per minute. At this instant, what must be the temperature of the surface of the pan that is in contact...
3. A water heater is covered with insulation boards over a total surface area of 3 m. The board is 5.3 centimeter thick. The inside board surface is at 69'C, and the board material has a conductivity of 0.08 W/m-K. If the heat loss is 200 W, determine the outside surface temperature. Given A= 3m? T= 69°C Tonto? K= 0.08 W/mk Q=2oow 4. Determine the total rate of heat transfer from a person standing in a breezy room at 20°C...
PLEASE ANSWER a,b,c
Heat Conduction Heat conduction occurs through any material, represented here by a rectangular bar, whether window glass or walrus blubber. The temperature of the material is T2 on the left and T1 on the right, where T2 is greater than T1. The rate of heat transfer by conduction is directly proportional to the surface area A, the temperature difference T2 - T1, and the substance's conductivity k. The rate of heat transfer is inversely proportional to the...
13.15 The base plate of an ironi (provided by resistance over a base plate cros plate of an iron is 0.6 cm thick. The plate is subjected to 100 W of power ded by resistance heaters inside the iron, as shown in Figure P13-15). base plate cross-sectional area of 250 cm, resulting in a uniform flux rated on the inside surface. The thermal conductivity of the metal base generated on th is k = 20 W/m- C. The outside ambient...
One end of a long rod 3 cm in diameter is inserted into a furnace with the (3 outer end projecting into the outside air. Once the steady state is reached the temperature of the rod is measured at two points, 15 cm apart and found to be 140°C and 100°C, when the atmospheric air is at 30°C with convection coefficient of 20 W/m2.K. Calculate the thermal conductivity of *.the rod material Consider a stainless steel spoon(k = 15.1 W/m.K), partially...
QUESTION 6 (100 marks) An aluminum pan whose thermal conductivity is 237 W/m. °C has a flat bottom with diameter 20 cm and thickness 0.4 cm. Heat is transferred steadily to boiling water in the pan through its bottom at a rate of 800 W. If the inner surface of the bottom of the pan is at 105°C, determine the temperature of the outer surface of the bottom of the pan, figure 4. STAR 0.4 cm 800 W Figure (4)
Heat conduction occurs through any material, represented here by a rectangular bar, whether window glass or walrus blubber. The temperature of the material is T2 on the left and T1 on the right, where T2 is greater than T1. The rate of heat transfer by conduction is directly proportional to the surface area A, the temperature difference T2 - T1, and the substance's conductivity k. The rate of heat transfer is inversely proportional to the thickness d. Q kA (T2-T)...
During a cooling process of a stainless steel plate, water at 30°C flows over this plate at a velocity of 0.02 m/s. The stainless steel plate (k=19 W/mK) has 1.15 meter long in the flow direction) and the plate width is 0.7 meter. The plate has a uniform surface temperature of 70°C. Determine, 1. The average friction coefficient 2. The total drag force due to friction (N) 3. The average convection heat transfer 2. coefficient (W/m K) 4. The steady...
6 Water is heated in a pipe by exchanging heat with a warmer fluid that flows outside the pipe. Inside diameter of the pipe is dn 0.045 m and outside diameter dour0.05 m. Mean velocity of the water in the pipe is um-0.31 m/s and the bulk temperature is 323 K (density 988 kg m-3; viscosity 0.00055 kg m' sı. Pr 3.56, thermal conductivity k 0.64 W m1 Kt). The material of the pipe has thermal conductivity k 0.61 W...
Question Water at an average temperature of 110°C and an average velocity of 3.5 m/s flows through a 5-m-long Beryllium Copper (k-66 w/m.k) tube merge in a boiling water tank. Do NOT ignore the wall resistance. The inner and outer diameters of the tube are Di 1.0 cm and Do 2 cm, respectively. If the convection heat transfer coefficient at the outer surface of the tube where boiling is taking place is ho- 8400 W/m2.K, a) Determine the overall heat...