Homework Answers
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatu...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
Design Problem Design a small chiller room 2.35 m wide by 6 m long and 2.38...
Design Problem Design a small chiller room 2.35 m wide by 6 m long and 2.38 m high that is to be used to chill and store a food product. The chiller is to be loaded with 60 buckets of the food product at 23 °C which needs to be cooled down to 3 °C within 24 hours using air at 1 °C, with a heat transfer coefficient of 36 W m2 K Tasks 1. Calculate the peak refrigeration loading...
P2 (50 pts.) Assume the roof of a room in a typical house is 12 cm...
P2 (50 pts.) Assume the roof of a room in a typical house is 12 cm thick concrete slab with a thermal conductivity k = 1.50 W/m•°C. The roof of the room is 4 m wide and 4 m long. Assume convection heat transfer coefficients on the inner and outer surfaces of the roof are hi=6 and ho=10 W/m2°C, respectively. At noon, when the sun is "hotter" the solar irradiation is estimated to be color = 750 W/m- and the...
(b) The brick wall of a building has dimensions of 4 m by 10 m, and it is 15 cm thick with a coefficient of thermal con...
(b) The brick wall of a building has dimensions of 4 m by 10 m, and it is 15 cm thick with a coefficient of thermal conductivity of 0.8 W.m1ec1. How much heat flows through the wall in a 12-hour period when the average inside and outside temperatures are 20 °C and 5 °C respectively? Will a 2 kW heater operating in the room compensate for the heat loss? Justify your answer. A layer of insulating material of thickness 5...
D Question 2 1 pts Hot and cold water pipes 8 m long run parallel to...
D Question 2 1 pts Hot and cold water pipes 8 m long run parallel to each other in a thick concrete layer. The diameters of both pipes are 7 cm, and the distance between the centerlines of the pipes is 37 cm. The surface temperatures of the hot and cold pipes are 54°C and 14°C, respectively. Taking the thermal conductivity of the concrete to be k = 0.75 W/m • °C, determine the rate of heat transfer in Watts...
you are living by the beach and have decided to build a concrete home. It is...
you are living by the beach and have decided to build a concrete home. It is typically air conditioned as 20 C, while the outside temperature is 97 C on average. For a home with dimensions as shown below and 0.2m thick walls, what is the typical daily energy loss of the home due to cooling the heat transferring into the home through concrete if the thermal conductivity of concrete is k=1.4 W/m K. Answer in mWh Dimensions 10...
Problem : A cryogenic flui d is flowing in a 304 SS pipe. The pipe is...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
A construction crew is building an ice rink. A wall 10 m high by 30 m...
A construction crew is building an ice rink. A wall 10 m high by 30 m long separates the cold rink (40◦F) from the nice warm locker (75◦F) room. The wall has two layers of drywall that are 0.5 inch thick each and have a thermal conductivity of 0.17 W/m K. What should the R-value be of the insulation between the walls to keep the rate of heat transfer to a maximum of 40 W?
S A 10-m-long section of an 8 cm (r=4 cm) of external diameter horizontal steam water...
S A 10-m-long section of an 8 cm (r=4 cm) of external diameter horizontal steam water pipe passes through a large room whose temperature is To =15°C. The pipe is insulated with an insulating material of conductivity k=0.01 W/m-°C and 1 cm thick. If the inner surface temperature of the pipe is 95 °C (at r2) and the pipe is exposed to a cross wind of 6.0 m/s, determine the rate of heat loss from the pipe (neglect radiation). Thermal...
A basement for a certain home is 3.9 m × 4.8 m with a ceiling height...
A basement for a certain home is 3.9 m × 4.8 m with a ceiling height of 2.9 m. The walls are made up of cement concrete having a thickness of 9.8 cm. In the winter the convection coefficient on the inside is 10 W/m2 · ◦C and the soil on the outside has thermal conductivity, k =1.7 W/m·◦C. (i) Perform a critical analysis of the above stated problem and estimate the overall heat transfer coefficient U defined by the...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
Design Problem Design a small chiller room 2.35 m wide by 6 m long and 2.38 m high that is to be used to chill and store a food product. The chiller is to be loaded with 60 buckets of the food product at 23 °C which needs to be cooled down to 3 °C within 24 hours using air at 1 °C, with a heat transfer coefficient of 36 W m2 K Tasks 1. Calculate the peak refrigeration loading...
P2 (50 pts.) Assume the roof of a room in a typical house is 12 cm thick concrete slab with a thermal conductivity k = 1.50 W/m•°C. The roof of the room is 4 m wide and 4 m long. Assume convection heat transfer coefficients on the inner and outer surfaces of the roof are hi=6 and ho=10 W/m2°C, respectively. At noon, when the sun is "hotter" the solar irradiation is estimated to be color = 750 W/m- and the...
(b) The brick wall of a building has dimensions of 4 m by 10 m, and it is 15 cm thick with a coefficient of thermal conductivity of 0.8 W.m1ec1. How much heat flows through the wall in a 12-hour period when the average inside and outside temperatures are 20 °C and 5 °C respectively? Will a 2 kW heater operating in the room compensate for the heat loss? Justify your answer. A layer of insulating material of thickness 5...
D Question 2 1 pts Hot and cold water pipes 8 m long run parallel to each other in a thick concrete layer. The diameters of both pipes are 7 cm, and the distance between the centerlines of the pipes is 37 cm. The surface temperatures of the hot and cold pipes are 54°C and 14°C, respectively. Taking the thermal conductivity of the concrete to be k = 0.75 W/m • °C, determine the rate of heat transfer in Watts...
Problem
:
A cryogenic flui
d is flowing in a
304 SS
pipe.
The pipe is insulated
on its outside surface
with
6
-
mm thick,
evacuated,
aluminum foil/glass mat insulation.
(“Evacuated” means a partial vacuum is drawn on the
insulation to
remove air that would otherwise fill
pores inside the insulation.)
The pipe
inside diameter
is 127 mm; it’s outside diameter is 138 mm.
The
fluid temperature is
-
173
o
C
.
T
he
air temperature
outside the...
S A 10-m-long section of an 8 cm (r=4 cm) of external diameter horizontal steam water pipe passes through a large room whose temperature is To =15°C. The pipe is insulated with an insulating material of conductivity k=0.01 W/m-°C and 1 cm thick. If the inner surface temperature of the pipe is 95 °C (at r2) and the pipe is exposed to a cross wind of 6.0 m/s, determine the rate of heat loss from the pipe (neglect radiation). Thermal...
Most questions answered within 3 hours.
-
what is IoT? How is it being used today? How will it be used in
the...
asked 11 minutes ago -
Please answer the four questions below.
1. If you were going to test a method that...
asked 26 minutes ago -
Provide two or three examples of support he uses to reinforce
his arguments?
The Alienation of...
asked 33 minutes ago -
QUESTION 1
Why do we see terms with multiple names in the database
community?
Consistency is...
asked 29 minutes ago -
In a titration experiment, 11.5 mL of 0.400 M H2SO4 neutralized
48.0 mL of NaOH. What...
asked 33 minutes ago -
A shot-putter throws the shot with a horizontal velocity of 10
m/s and a
vertical velocity...
asked 49 minutes ago -
Mildred sells industrial-sized refrigeration units. Her
prospective buyer's face looks tense, and his forehead is wrinkled....
asked 50 minutes ago -
Clark Heter is an industrial engineer at Lyons Products. He
would like to determine whether there...
asked 1 hour ago -
3. Use a text editor to create a comma-delimited file of user
IDs and passwords. Revise...
asked 1 hour ago -
Jensen and Associates has a projected balance
sheet that includes the following accounts. What is the...
asked 1 hour ago -
implement a doubly-linked list in C. Each node in the linked list should contain a string,...
asked 1 hour ago -
What are some best practices and things to avoid when developing
a PowerPoint presentation or file
asked 1 hour ago