A. Three identical loads having an impedance of (8.66 + j5) ohms are connected in wye across a balanced three-phase system with sequence
set with Vab = (300 + j0) volts. If a wattmeter is connected in the circuit with its current coil on line A and potential coil across lines A and C, determine the meter reading.
B. A three-phase, 3-wire balanced delta connected load yields wattmeter readings of 1154 W and 557 W. Obtain the load resistance per phase if the line voltage is 100 V.
We need at least 10 more requests to produce the answer.
0 / 10 have requested this problem solution
The more requests, the faster the answer.
A. Three identical loads having an impedance of (8.66 + j5) ohms are connected in wye...
2. Two balanced three-phase loads are connected in parallel. One load with per phase impedance 21 ?, is connected in delta, and the other load has per phase impedance 15 2 and is connected in wye. Ignore the line impedance. If the line voltage is a 208230° Vrms, determine (a) the phase voltage for phase-a, ) the line current Ia*, (c) the phase currents in the delta load (d) the complex power of the load and the power factor.
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
I. A balanced three-phase positive sequence wye-connected 60Hz source voltage has line-neutral voltage of V, 1000 V. It is connected to a three- phase wye connected load whose impedance is z 50+j37.7 2 a. Find line currents ia ib, ic and line-line voltages Vab, Vbo Vac b. Find the total complex power delivered to the load. c. Find delta-connected capacitor bank needed to bring the PF to 0.95 (lagging) of system. d. Re-calculate currents la, ib, io with Case c....
1. A balanced delta-connected load has 12 +j16 ohms impedance per phase, and is energized by 208 V line-to-line. The phase sequence is ‘a-b-c'. (a) Find the line and phase voltages and currents at the delta load, and show them in a phasor diagram. (b) If the delta-connected load is rewired and connected in wye, show the line and phase voltages and currents at the wye load in a phasor diagram.
ELE2601/101/3/2019 QUESTION 4 A 400 V three-phase, 50 Hz system, ABC sequence supplies the following loads: A star-connected load with the following phase impedances: A delta-connected load of equal phase impedances: Use VAB as reference and determine the following quantities: 4.1 The magnitude and angle of the currents drawn by the star-connected load (IAN; lBN; ICN). 4.1.1 The magnitude and angle of the phase (IAB; lBc; ICa) and line (lA; ls; Ic) currents drawn by the delta-connected load. 4.1.2 (12)...
508 CHAPTER 11 . POLYPHASE CIRCUITS 11.40 In a balanced three-phase system, the source has an aboc phase-sequence and is connected in delta. There are two rallel wye-connected loads. The phase impedance of load i and load 2 is 4 The line impedance connecting the source to the loads is 0.3 + j0.2 2. If the curre IAN! = 10/20-Arms, find the delta currents in the source 4 Ω and 10 +/4 Ω, respectively. nt in the a phase of...
QUESTION 4: A 400 V three-phase, 50 Hz system, ABC sequence supplies the following loads: A star-connected load with the following phase impedances: ZA ZZ10410' BN A delta-connected load of equal phase impedances: ZB15435Z=30Z-75Zc=(19+j27 )n 4.1 Use VAB as reference and detemine the following quantities: The magnitude and angle of the currents drawn by the star-connected load (lAN lEN, ICN) 4.1.1 (6) 4.1.2 The magnitude and angle of the phase (IAB; lBc; IcA) and line (IA; lB; Ic) currents drawn...
A three-phase line with an impedance of (0.25+j1.25) ohms/phase supplies power to three balanced 3-phase parallel connected loads: • Load 1 absorbs a total of 125 kW and 100 KVAR • Load 2 is a delta-connected impedance load with (125+j 40)ohms/phase • Load 3 absorbs 120 kVA at 0.8 power factor (lagging) Given that the line-neutral voltage at the load end of the line is 2400 V, determine the magnitude of the line-to- line voltage at the source end of...
Section 2: Three phase circuit Three phase wye connected generator supplies two parallel loads through a feeder. Load 1 Is an unbalanced wye connected load and load 2 is a balanced delta connected load. System data: Generator: Sg = 600 MVA; vg-11-25KV; Xg = 11896; Feeder: Z (0.08+j0.62) Ω/mile, length-8 miles Load 1: VII = 24KV, Pa =75MW Pb 75MW Pc=75MW pf_a=0.8 pf b 0.84 pf_c=0.78 Load 2: VIl-24KV; P total-225MW, pf 0.8; (all the power factor is supposed to...
A balanced three-phase delta-connected load is connected to a balanced three-phase delta-connected source via a transmission line. The line-line voltage for the source is 100∟0° V/phase and the impedance of load is (27 + j18) Ω/phase. The transmission line has an impedance of (1 + j4) Ω/line. a) Draw the complete schematic of the power system showing the location of wattmeters. (Two-Wattmeter system is considered for this problem). Phase “a” could be considered as a reference phase. b) What must...