Determine the dryiness fraction of steam that is at an absolute pressure of 650kpa specific enthalpy...
Determine the dryiness fraction of steam that is at an absolute pressure of 650kpa specific enthalpy is 2,450 kj/kg?
a)27,335
b) 75
c)88
d)85
Homework Answers
Add Answer to:
Determine the dryiness fraction of steam that is at an
absolute pressure of 650kpa specific enthalpy...
Example A steam turbine receives steam with a specific enthalpy of 3121 kJ/kg. The steam leaves...
Example A steam turbine receives steam with a specific enthalpy of 3121 kJ/kg. The steam leaves the turbine with a specific enthalpy of 2676 kJ/kg. The steam enters and leaves the turbine with velocities of 15 m/s and 60m/s. The elevation difference between the entry and exit ports is negligible and the heat energy lost through the turbine walls is 7600 kJ/h. Calculate the power output if the mass flow through the turbine is 0.5 kg/s. High pressure steam Low...
HW-33 (25 points) Superheated steam at an absolute pressure of 20 MPa and a temperature of...
HW-33 (25 points) Superheated steam at an absolute pressure of 20 MPa and a temperature of 560°C flows into the turbine of a Rankine cycle. The absolute pressure at the turbines outlet is 0.5 bar, and liquid exits the condenser at an absolute pressure of 0.4 bar and a temperature 75°C. The absolute pressure is increased to 20.1 MPa across the pump. The turbine and pump have isentropic efficiencies of 81% and 85%, respectively. Cooling water enters the condenser at...
A steam power plant design consists of an ideal Rankine cycle with regeneration. Steam enters Turbine...
A steam power plant design consists of an ideal Rankine cycle with regeneration. Steam enters Turbine 1 at P1 and T1 at the rate of m1 and exits at P2. A fraction (y') of the steam exiting Turbine 1 is diverted to a closed feedwater heater while the remainder enters Turbine 2. A portion (y'') of the steam exiting Turbine 2 at P3 is diverted to an open feedwater heater while the remainder enters Turbine 3. The exit of Turbine...
A steam power plant design consists of an ideal Rankine cycle with reheat and regeneration. Steam...
A steam power plant design consists of an ideal Rankine cycle with reheat and regeneration. Steam enters Turbine 1 at P1 and T1 at the rate of m1 and exits at P2. A fraction (y') of the steam exiting Turbine 1 is diverted to a closed feedwater heater while the remainder is reheated to T3 before entering Turbine 2. A fraction (y'') of the steam exiting Turbine 2 at P4 is diverted to an open feedwater heater while the remainder...
- Question 3 Superheated steam at a pressure and temperature of 60 bar and 450 degC...
- Question 3 Superheated steam at a pressure and temperature of 60 bar and 450 degC undergoes adiabatic expansion through a turbine at a steady rate of 16.3 kg/s. The steam exits the turbine in a wet condition with a pressure of 0.34 bar and specific enthalpy of 2,355 kJ/kg. 25 points Determine the How Did I Do? How Did I Do? properties of the superheated steam at the turbine entrance (state 1): Specific volume, V: 0.0521 m^3/kg kJ/kg Specifio...
1. a) Superheated steam at T1 (°C) and corresponding specific enthalpy H^1 and 10.0 bar pressure...
1. a) Superheated steam at T1 (°C) and corresponding specific enthalpy H^1 and 10.0 bar pressure is combined with saturated steam at T2 (°C) and 7.0 bar pressure in a ratio 1.96kg of steam at 10.0 bar / 1.0 kg steam at 7.0 bar. The product stream is at 250°C and 7.0 bar. The process operates at steady state. What is the specific enthalpy H^1 associated with stream 1 assuming that the blender operates adiabatically? b) You have calculated the...
A) Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 2,663 kJ/...
A) Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 2,663 kJ/kg and a mass flow rate of 0.1 kg/s. At the exit, the specific enthalpy is 1,531 kJ/kg. If there is no significant change in kinetic energy from inlet to exit, determine the rate of heat transfer between the pipe and its surroundings, in kW. B) Refrigerant 134a enters a horizontal pipe operating at steady state at 40°C, 3.1 bar and a velocity of...
A proposed steam power plant design consists of an ideal Rankine cycle with reheat and regeneration....
A proposed steam power plant design consists of an ideal Rankine cycle with reheat and regeneration. Steam enters Turbine 1 at Pl and T1 at the rate of mi and exits at P2. A fraction () of the steam exiting Turbine 1 is diverted to an open feedwater heater while the remainder is reheated to T3 before entering Turbine 2. The condenser operates at P4. Saturated liquid exits the condenser and is fed to Pump 1. The outlet of Pump...
Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 1,671 kJ/kg...
Steam enters a horizontal pipe operating at steady state with a specific enthalpy of 1,671 kJ/kg and a mass flow rate of 0.5 kg/s. At the exit, the specific enthalpy is 2,162 kJ/kg. If there is no significant change in kinetic energy from inlet to exit, determine the rate of heat transfer between the pipe and its surroundings, in kW.
What are the specific enthalpy and specific volume of steam at 400.0°C and 80.0 bar? Number Number kJ/kg Î= 0 m²/kg Is...
What are the specific enthalpy and specific volume of steam at 400.0°C and 80.0 bar? Number Number kJ/kg Î= 0 m²/kg Is this steam superheated or saturated? O O saturated superheated If this steam is superheated, what is its degrees of superheat? If the steam is saturated, respond with "0". Number Estimate the temperature, specific enthalpy and specific volume of saturated steam at 5.25 bar. Number Number Number Tsar = 10 °C kJ/kg mº/kg If 18.0 m/min of steam at...
Example A steam turbine receives steam with a specific enthalpy of 3121 kJ/kg. The steam leaves the turbine with a specific enthalpy of 2676 kJ/kg. The steam enters and leaves the turbine with velocities of 15 m/s and 60m/s. The elevation difference between the entry and exit ports is negligible and the heat energy lost through the turbine walls is 7600 kJ/h. Calculate the power output if the mass flow through the turbine is 0.5 kg/s. High pressure steam Low...
HW-33 (25 points) Superheated steam at an absolute pressure of 20 MPa and a temperature of 560°C flows into the turbine of a Rankine cycle. The absolute pressure at the turbines outlet is 0.5 bar, and liquid exits the condenser at an absolute pressure of 0.4 bar and a temperature 75°C. The absolute pressure is increased to 20.1 MPa across the pump. The turbine and pump have isentropic efficiencies of 81% and 85%, respectively. Cooling water enters the condenser at...
- Question 3 Superheated steam at a pressure and temperature of 60 bar and 450 degC undergoes adiabatic expansion through a turbine at a steady rate of 16.3 kg/s. The steam exits the turbine in a wet condition with a pressure of 0.34 bar and specific enthalpy of 2,355 kJ/kg. 25 points Determine the How Did I Do? How Did I Do? properties of the superheated steam at the turbine entrance (state 1): Specific volume, V: 0.0521 m^3/kg kJ/kg Specifio...
A proposed steam power plant design consists of an ideal Rankine cycle with reheat and regeneration. Steam enters Turbine 1 at Pl and T1 at the rate of mi and exits at P2. A fraction () of the steam exiting Turbine 1 is diverted to an open feedwater heater while the remainder is reheated to T3 before entering Turbine 2. The condenser operates at P4. Saturated liquid exits the condenser and is fed to Pump 1. The outlet of Pump...
What are the specific enthalpy and specific volume of steam at 400.0°C and 80.0 bar? Number Number kJ/kg Î= 0 m²/kg Is this steam superheated or saturated? O O saturated superheated If this steam is superheated, what is its degrees of superheat? If the steam is saturated, respond with "0". Number Estimate the temperature, specific enthalpy and specific volume of saturated steam at 5.25 bar. Number Number Number Tsar = 10 °C kJ/kg mº/kg If 18.0 m/min of steam at...
Most questions answered within 3 hours.
-
we discussed a number of factors in the "General (remote)
Environment" that can affect the...
asked 15 minutes ago -
Using the IS-PC-MR model, describe how the economy responds to
an inflation shock in the following...
asked 16 minutes ago -
Ammonium nitrate has been used as a high explosive because it is
unstable and decomposes into...
asked 20 minutes ago -
How long would it take a car with a top speed of 203 mph to travel...
asked 19 minutes ago -
9) What are the two different ways in which a user can interact
(interface/work) with UNIX?...
asked 23 minutes ago -
Exercise 2.5. Use the Binomial Theorem to prove that, for all n
≥ 0 and for...
asked 40 minutes ago -
The teachers at Bryan ISD want to examine if a newly developed
intervention program for disadvantaged...
asked 45 minutes ago -
Describe the
characteristics of small business.
- Name the most
common causes of small business failure....
asked 48 minutes ago -
A pendulum is made up of a small sphere of mass 0.500 kg
attached to a...
asked 1 hour ago -
Given a pn junction with both thin p-type and n-type materials
such that Wn and Wp...
asked 1 hour ago -
it was discussed that animals should be treated the same as
humans, that pain is pain,...
asked 1 hour ago -
The vapor pressure of water at 20°C is 17.54 torr. Calculate the
vapor pressure (in torr)...
asked 1 hour ago