Water at 15 degree Celsius , density = 999kg/cubic meter, viscosity = 0.001138 kg/ms , is...
Water at 15 degree Celsius , density = 999kg/cubic meter, viscosity = 0.001138 kg/ms , is flowing steadily in a 5 cm diameter horizontal pipe made of stainless steel at a rate of 0.006 m3/s . Determine the pressure drop, the head loss and the required pumping power input for flow over a 60m long section of the pipe.
Homework Answers
Add Answer to:
Water at 15 degree Celsius , density = 999kg/cubic meter,
viscosity = 0.001138 kg/ms , is...
Water at 10°C (p = 999.7 kg/m3 and μ = 1.307 × 10-3 kg/m.s) is flowing steadily in a 0.20-cm-diameter, 15-m-long pipe at an average velocity of 1.2 m/s
8-31 Water at 10°C (p = 999.7 kg/m3 and μ = 1.307 × 10-3 kg/m.s) is flowing steadily in a 0.20-cm-diameter, 15-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop. Answers: (a) 188 kPa, (b) 19.2 m, (c) 0.71 W 8-32 Water at 15°C (p = 999.1 kg/m3 and μ = 1.138 × 10-3 kg/m . s) is flowing steadily in a 30-m-long...
Water at 15 degrees celcius is flowing steadily in a 5cm horizontal pipe made of stainless...
Water at 15 degrees celcius is flowing steadily in a 5cm horizontal pipe made of stainless steel (roughness 0.22mm) at a rate of 6L/s. For a 60m long pipe. Determine head loss due to friction, the pressure loss in Kpa and required pumping power in kw.
Water at 15°C (ρ = 999.1 kg/m3 and μ = 1.138 × 10−3 kg/m·s) is flowing steadily in a 34-m-long and 6-cm-diameter horizontal pipe made of stainless steel at a rate of 10 L/s. Determine the pressure d...
Water at 15°C (ρ = 999.1 kg/m3and μ = 1.138 × 10−3 kg/m·s) is flowing
steadily in a 34-m-long and 6-cm-diameter horizontal pipe made of
stainless steel at a rate of 10 L/s. Determine the pressure drop,
the head loss, and the pumping power requirement to overcome this
pressure drop. The roughness of stainless steel is 0.002 mm.Determine the following:A)The pressure drop in _______ kPa.B)The head loss in _______ m.C)The pumping power requirement in _______ kW.
Water at 10 °C (p = 999.7kg/m3 and μ = 1.307×10-3kg/ms) is flowing steadily in a 0.12-cm-diameter, 15-m-long pipe at an average velocity of 0.9 m/s. Determine
Water at 10 °C (p = 999.7kg/m3 and μ = 1.307×10-3kg/ms) is flowing steadily in a 0.12-cm-diameter, 15-m-long pipe at an average velocity of 0.9 m/s. Determine (a) the Reynolds number and decide weather the flow is laminar or turbulent (b) the head loss, (c) the pressure drop, and (d) the pumping power requirement to overcome this pressure drop.
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily...
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily in a 0.25-cm diameter, 35-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop.
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30...
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30 m-long and 5 cm-diameter inclined pipe ( = 40% made of stainless steel (ε = 0.002mm) at a rate of 9 L/s. Determine: 1. The pressure drop (P1-P) 2. The pumping power requirement to overcome this pressure drop. 5cm 9 L/s L 30 m
Air enters a 10-m-long section of a rectangular duct of cross section 15 cm X 20 cm made of commercial steel at an average velocity of 7 m/s
Air enters a 10-m-long section of a rectangular duct of cross section 15 cm X 20 cm made of commercial steel at an average velocity of 7 m/s.(p = 1.145kg/m3 ,μ = 1.895x10-5kg/ms) and e=0.000045 m). For this pipe determine (a)the Reynolds number and decide weather the flow is laminar or turbulent (b) the head loss, (c) the pressure drop, and (d) the pumping power requirement to overcome this pressure drop.
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth...
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth circular pipe of inner diameter 2 cm. It then flows through a filtering section made up of the same pipe packed at void fraction ε-0.4 with solid spherical particles of diameter 0.5 mm to filter out any fine material. All pipe sections are straight as shown. Design constraint: the pressure drop in the packed bed section (call this AP2)...
Water, with density of 1000 kg/m3 and kinematic viscosity of 1.0 x 10- m2/s, is pumped through a ...
Water, with density of 1000 kg/m3 and kinematic viscosity of 1.0 x 10- m2/s, is pumped through a total length of 60 m of pipe from a lower reservoir to a higher reservoir. The inner diameter of the pipe is 30 cm. Both reservoirs are open to the atmosphere, and the water surface of the higher reservoir is 10 m above that of the lower reservoir. The entrance from the lower reservoir to the pipe is sharp-edged, and along the...
you have water that flows stationary in a horizontal pipe 0.2667m in diameter, made of stainless...
you have water that flows stationary in a horizontal pipe 0.2667m in diameter, made of stainless steel at a rate of 20 lt / s. Determine the head loss and pressure drop M = 1.14x10 ^ -6 m2 / s, if the pipe is 1 km long
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily in a 0.25-cm diameter, 35-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop.
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30 m-long and 5 cm-diameter inclined pipe ( = 40% made of stainless steel (ε = 0.002mm) at a rate of 9 L/s. Determine: 1. The pressure drop (P1-P) 2. The pumping power requirement to overcome this pressure drop. 5cm 9 L/s L 30 m
1. An oil of density p800 kg/m3 and viscosity u 5 cP flows at 10 liters/min through a 30 m smooth circular pipe of inner diameter 2 cm. It then flows through a filtering section made up of the same pipe packed at void fraction ε-0.4 with solid spherical particles of diameter 0.5 mm to filter out any fine material. All pipe sections are straight as shown. Design constraint: the pressure drop in the packed bed section (call this AP2)...
Water, with density of 1000 kg/m3 and kinematic viscosity of 1.0 x 10- m2/s, is pumped through a total length of 60 m of pipe from a lower reservoir to a higher reservoir. The inner diameter of the pipe is 30 cm. Both reservoirs are open to the atmosphere, and the water surface of the higher reservoir is 10 m above that of the lower reservoir. The entrance from the lower reservoir to the pipe is sharp-edged, and along the...
Most questions answered within 3 hours.
-
For the following reaction, 0.128 moles of
potassium hydrogen sulfateare mixed with
0.504 moles of potassium...
asked 1 hour ago -
1. What is the present value of $400, three years in the future
if the interest...
asked 2 hours ago -
The labor force minus the number of employed equals the number
of unemployed.
a. True
b....
asked 4 hours ago -
Determine the mass in units of grams [g] of 0.49 moles [mol]
of a new fictitious...
asked 4 hours ago -
A horizontal mass of M=5kg is on a spring and stretched to
x=0.5m when released from...
asked 5 hours ago -
26 of 50
"I have worked at the Arizona Humane Society for ten years, and
have...
asked 6 hours ago -
Compare and contrast zero based budgeting and incremental (or
base year) budgeting.
asked 6 hours ago -
4 pts 10. Which of the following hypothesis would be MOST
difficult to test experimentally? Group...
asked 6 hours ago -
A business owner makes 1,000 items a day. Each day he or she
contributes eight hours...
asked 6 hours ago -
A
circular loop in the plane of a paper lies inca0.65 T magnetic
field pointing into...
asked 6 hours ago -
A business owner is trying to decide whether to buy, rent, or
lease office space and...
asked 6 hours ago -
Thermal Storage Solar heating of a house is much more efficient
if there is a way...
asked 6 hours ago