Water at 10°C (p = 999.7 kg/m3 and μ = 1.307 × 10-3 kg/m.s) is flowing steadily in a 0.20-cm-diameter, 15-m-long pipe at an average velocity of 1.2 m/s
8-31 Water at 10°C (p = 999.7 kg/m3 and μ = 1.307 × 10-3 kg/m.s) is flowing steadily in a 0.20-cm-diameter, 15-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop. Answers: (a) 188 kPa, (b) 19.2 m, (c) 0.71 W
8-32 Water at 15°C (p = 999.1 kg/m3 and μ = 1.138 × 10-3 kg/m . s) is flowing steadily in a 30-m-long and 4-cm-diameter horizontal pipe made of stainless steel at a rate of 8 L/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop.
Homework Answers
Add Answer to:
Water at 10°C (p = 999.7 kg/m3 and μ = 1.307 × 10-3 kg/m.s) is flowing steadily in a 0.20-cm-diameter, 15-m-long pipe at an average velocity of 1.2 m/s
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily...
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily in a 0.25-cm diameter, 35-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop.
Water at 10 °C (p = 999.7kg/m3 and μ = 1.307×10-3kg/ms) is flowing steadily in a 0.12-cm-diameter, 15-m-long pipe at an average velocity of 0.9 m/s. Determine
Water at 10 °C (p = 999.7kg/m3 and μ = 1.307×10-3kg/ms) is flowing steadily in a 0.12-cm-diameter, 15-m-long pipe at an average velocity of 0.9 m/s. Determine (a) the Reynolds number and decide weather the flow is laminar or turbulent (b) the head loss, (c) the pressure drop, and (d) the pumping power requirement to overcome this pressure drop.
Water at 15°C (ρ = 999.1 kg/m3 and μ = 1.138 × 10−3 kg/m·s) is flowing steadily in a 34-m-long and 6-cm-diameter horizontal pipe made of stainless steel at a rate of 10 L/s. Determine the pressure d...
Water at 15°C (ρ = 999.1 kg/m3and μ = 1.138 × 10−3 kg/m·s) is flowing
steadily in a 34-m-long and 6-cm-diameter horizontal pipe made of
stainless steel at a rate of 10 L/s. Determine the pressure drop,
the head loss, and the pumping power requirement to overcome this
pressure drop. The roughness of stainless steel is 0.002 mm.Determine the following:A)The pressure drop in _______ kPa.B)The head loss in _______ m.C)The pumping power requirement in _______ kW.
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30...
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30 m-long and 5 cm-diameter inclined pipe ( = 40% made of stainless steel (ε = 0.002mm) at a rate of 9 L/s. Determine: 1. The pressure drop (P1-P) 2. The pumping power requirement to overcome this pressure drop. 5cm 9 L/s L 30 m
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle...
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
3. Water at 10°C (p=999.7kg/m3 and p=1.307x10-3 kg/m.s) is flowing steadily through a 0.2-cm diameter and...
3. Water at 10°C (p=999.7kg/m3 and p=1.307x10-3 kg/m.s) is flowing steadily through a 0.2-cm diameter and 15m long pipe at an average velocity of 1.2m/s. . Determine the friction factor . A) 0.035 . B) 0.005 . C) 0.017 . D) 0.0005 . Calculate Re. f = 64/Re
Air enters a 10-m-long section of a rectangular duct of cross section 15 cm X 20 cm made of commercial steel at an average velocity of 7 m/s
Air enters a 10-m-long section of a rectangular duct of cross section 15 cm X 20 cm made of commercial steel at an average velocity of 7 m/s.(p = 1.145kg/m3 ,μ = 1.895x10-5kg/ms) and e=0.000045 m). For this pipe determine (a)the Reynolds number and decide weather the flow is laminar or turbulent (b) the head loss, (c) the pressure drop, and (d) the pumping power requirement to overcome this pressure drop.
5.16. Water is flowing in a 3-cm-diameter pipe at an average velocity of Uav 2 m/s....
5.16. Water is flowing in a 3-cm-diameter pipe at an average velocity of Uav 2 m/s. Assuming water density of ρ-1000 kg/m 3 and viscosity μ-10-3 N s'm2, calculate the velocity at the center of the pipe, the shear τ at the wall, and the Reynolds number. Assuming laminar flow, calculate friction coefficient C and pressure drop dp/dx.
Water at 15 degree Celsius , density = 999kg/cubic meter, viscosity = 0.001138 kg/ms , is...
Water at 15 degree Celsius , density = 999kg/cubic meter, viscosity = 0.001138 kg/ms , is flowing steadily in a 5 cm diameter horizontal pipe made of stainless steel at a rate of 0.006 m3/s . Determine the pressure drop, the head loss and the required pumping power input for flow over a 60m long section of the pipe.
Water at 15 degrees celcius is flowing steadily in a 5cm horizontal pipe made of stainless...
Water at 15 degrees celcius is flowing steadily in a 5cm horizontal pipe made of stainless steel (roughness 0.22mm) at a rate of 6L/s. For a 60m long pipe. Determine head loss due to friction, the pressure loss in Kpa and required pumping power in kw.
3) Water at 15°C (p- 999.7 kg/m3 and u 1.307 x 10-3 kg/m-s) is flowing steadily in a 0.25-cm diameter, 35-m-long pipe at an average velocity of 1.2 m/s. Determine (a) the pressure drop, (b) the head loss, and (c) the pumping power requirement to overcome this pressure drop.
Water (p = 1000 kg/m3 and u = 1.002X10-3 kg/m.s) is flowing steadily in a 30 m-long and 5 cm-diameter inclined pipe ( = 40% made of stainless steel (ε = 0.002mm) at a rate of 9 L/s. Determine: 1. The pressure drop (P1-P) 2. The pumping power requirement to overcome this pressure drop. 5cm 9 L/s L 30 m
A flow nozzle equipped with a differential pressure gage is used to measure the flow rate of water at 10°C (p 9997 kg/m3 and p 1.307 x 10-3 kg/m s) through a 3-cm-diameter horizontal pipe. The nozzle exit diameter is 1.5 cm, and the measured pressure drop is 3.3 kPa. Determine the volume flow rate of water, the average velocity through the pipe, and the head loss 1.5 cm Differential pressure gage -3 m3(s m/s The volume flow rate of...
3. Water at 10°C (p=999.7kg/m3 and p=1.307x10-3 kg/m.s) is flowing steadily through a 0.2-cm diameter and 15m long pipe at an average velocity of 1.2m/s. . Determine the friction factor . A) 0.035 . B) 0.005 . C) 0.017 . D) 0.0005 . Calculate Re. f = 64/Re
5.16. Water is flowing in a 3-cm-diameter pipe at an average velocity of Uav 2 m/s. Assuming water density of ρ-1000 kg/m 3 and viscosity μ-10-3 N s'm2, calculate the velocity at the center of the pipe, the shear τ at the wall, and the Reynolds number. Assuming laminar flow, calculate friction coefficient C and pressure drop dp/dx.
Most questions answered within 3 hours.
-
I just took a final for chemistry 2. There were alot of
questions on cell potential....
asked 1 minute from now -
In which region of the country did Methodists and
Baptists have the largest following?
a. The...
asked 1 minute from now -
A man is standing on a ledge when he throws a ball. The speed of
the...
asked 6 minutes ago -
Facebook Marketing benefit: How is this tool useful for
marketing purposes? Identify and explain at least...
asked 18 minutes ago -
What are the five considerations relevant to the
substantive fairness of a dismissal for permanent incapacity?...
asked 18 minutes ago -
Prince Electronics, a manufacturer of consumer electronic
goods, has five distribution centers in different regions of...
asked 20 minutes ago -
1.) For the following general reaction, rate = k[A]2 and k = 1.3
× 10−2 M−1...
asked 24 minutes ago -
In the Enron documentary(Netflix) What ethical issues did you
observe and who was responsible for them?
asked 24 minutes ago -
Many products fail, some of them spectacularly. Why do you
believe the failure rate for new...
asked 23 minutes ago -
An important news announcement is transmitted by radio waves to
people who are 65 km away,...
asked 43 minutes ago -
On June 30, 2021, Rosetta Granite purchased equipment for
$130,000. The estimated useful life of the...
asked 42 minutes ago -
. If you were the CEO of Agricole, would you pursue an
acquisition target in the...
asked 42 minutes ago