Homework Answers
Add Answer to:
The pressure tank in the figure is fabricated from spirally wrapped metal plates that are welded ...
P14.011 The pressure tank is fabricated from spirally wrapped metal plates that are welded at the...
P14.011 The pressure tank is fabricated from spirally wrapped metal plates that are welded at the seams in the orientation shown. The tank has an inside diameter of 780 mm and a wall thickness of 10.3 mm. For a gage pressure of 1.23 MPa, determine (a) the normal stress perpendicular to the weld (use positive for tension, negative for compression) and (b) the shear stress (absolute value) parallel to the weld. Assume B 56 Answers: (e) Normal stress -MPa (b)...
The cylinder consists of spirally wrapped steel plates that are welded at the seams in the...
The cylinder consists of spirally wrapped steel plates that are
welded at the seams in the orientation shown. Assume β = 30 ∘ . The
cylinder has an inside diameter of 31 in. and a wall thickness of
0.3125 in. The end of the cylinder is capped by a rigid end plate.
The cylinder is subjected to a compressive load of P = 115
kips and a torque of T = 255 kip-ft, which are applied to
the rigid end...
The cylinder consists of spirally wrapped steel plates that are welded at the seams in the...
The cylinder consists of spirally wrapped steel plates that are welded at the seams in the orientation shown. Assume β = 20°. The cylinder has an inside diameter of 34 in. and a wall thickness of 0.3750 in. The end of the cylinder is capped by a rigid end plate. The cylinder is subjected to a compressive load of P = 125 kips and a torque of T= 210 kip-ft, which are applied to the rigid end cap in the...
Part The cylinder consists of spirally wrapped steel plates that are welded at the seams in...
Part The cylinder consists of spirally wrapped steel plates that are welded at the seams in the orlentation shown. Assume 35, The cylinder has an Inslde diameter of 33 in. and a wall thickness of 0.3750 in. The end of the cylinder is capped by a rigld end plate. The cylinder is subjected to a nompressive load af P-80 kips and a torque of T-210 kip-ft, which are applied to the rigid and can in the directions shown. Datermina: (a)...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm wall thickness is fabricated...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm
wall thickness is fabricated from a 1.2 m length of spirally welded
pipe AB as shown. Tank gauge pressure is 4 MPa and centric axial
forces P and P1 of 240 kN act through rigid end plates. Determine:
(a) Net longitudinal and hoop stresses. (b) Normal stress acting
perpendicular to weld and shear stress parallel to weld (show
sketch of Mohr’s circle). (c) Determine the Factor of Safety...
A pressure vessel of 12” outer diameter and 0.2” wall thickness is fabricated by welding plate...
A pressure vessel of 12” outer diameter and 0.2” wall thickness is fabricated by welding plate in spiral into a cylinder that is 4 feet long. The gage pressure inside the vessel is 800 psi and 15 kip axial compression forces are applied to the rigid end caps. Determine the a) the principle stresses in the walls of the vessel, b) the maximum shear stress in the wall of the vessel (in or out of plane), c) the stress normal...
A cylindrical pressure vessel is constructed by welding steel plates together. The pressure vessel supports an...
A cylindrical pressure vessel is constructed by welding steel
plates together. The pressure vessel supports an internal pressure
of 240 (psi). In addition the pressure vessel supports an axial
load of 270000 (lbs.). The inner radius of the pressure vessel is
48 (inches) with a wall thickness of 0.3125 (inches). The plates
are welded at 72 degrees from the horizontal. Determine:
a) the stresses perpendicular and parallel to the weld. Show the
stresses on a properly oriented differential element.
The...
Problem 1 The gas storage tank has a longitudinal welded seam on its cylindrical section. The...
Problem 1 The gas storage tank has a longitudinal welded seam on its cylindrical section. The tank has an inner diameter of 1.40 m and a wall thickness of 6.0 mm. Determine the magnitude of normal stress on the weld if the internal tank pressure is 1.2 MPa. a) 170 MPa b) 140 MPa c) 96 MPa d) 53 MPa e) 1.7 MPa f) 250 kPa WELDED SEAM
12 Section 4. Problem 12 (25 pts.) A cylindrical pressure vessel is constructed by welding steel...
12 Section 4. Problem 12 (25 pts.) A cylindrical pressure vessel is constructed by welding steel plates together. The pressure vessel supports an internal pressure of 250 (psi). In addition the pressure vessel supports an axial load of 230000 (lbs.). The inner radius of the pressure vessel is 56 (inches) with a wall thickness of 0.4375 (inches). The plates are welded at 57 degrees from the horizontal. Determine: a) the stresses perpendicular and parallel to the weld. Show the stresses...
em 35? ? A cylindrical pressure vessel is constructed from a long, narrow steel plate by...
em 35? ? A cylindrical pressure vessel is constructed from a long, narrow steel plate by wrapping the plate around a mandrel and then welding along the edges of the plate to make a helical joint. The helical weld makes an angle ? 350 with the axial direction. The vessel has inner radius r = 1.8 m and wall thickness 20 mm. The material is steel with E 200 GPa and Poisson ratio 0.3. The internal pressure p = 800...
P14.011 The pressure tank is fabricated from spirally wrapped metal plates that are welded at the seams in the orientation shown. The tank has an inside diameter of 780 mm and a wall thickness of 10.3 mm. For a gage pressure of 1.23 MPa, determine (a) the normal stress perpendicular to the weld (use positive for tension, negative for compression) and (b) the shear stress (absolute value) parallel to the weld. Assume B 56 Answers: (e) Normal stress -MPa (b)...
The cylinder consists of spirally wrapped steel plates that are
welded at the seams in the orientation shown. Assume β = 30 ∘ . The
cylinder has an inside diameter of 31 in. and a wall thickness of
0.3125 in. The end of the cylinder is capped by a rigid end plate.
The cylinder is subjected to a compressive load of P = 115
kips and a torque of T = 255 kip-ft, which are applied to
the rigid end...
The cylinder consists of spirally wrapped steel plates that are welded at the seams in the orientation shown. Assume β = 20°. The cylinder has an inside diameter of 34 in. and a wall thickness of 0.3750 in. The end of the cylinder is capped by a rigid end plate. The cylinder is subjected to a compressive load of P = 125 kips and a torque of T= 210 kip-ft, which are applied to the rigid end cap in the...
Part The cylinder consists of spirally wrapped steel plates that are welded at the seams in the orlentation shown. Assume 35, The cylinder has an Inslde diameter of 33 in. and a wall thickness of 0.3750 in. The end of the cylinder is capped by a rigld end plate. The cylinder is subjected to a nompressive load af P-80 kips and a torque of T-210 kip-ft, which are applied to the rigid and can in the directions shown. Datermina: (a)...
A cylindrical pressure vessel of 250 mm mean diameter and 6 mm
wall thickness is fabricated from a 1.2 m length of spirally welded
pipe AB as shown. Tank gauge pressure is 4 MPa and centric axial
forces P and P1 of 240 kN act through rigid end plates. Determine:
(a) Net longitudinal and hoop stresses. (b) Normal stress acting
perpendicular to weld and shear stress parallel to weld (show
sketch of Mohr’s circle). (c) Determine the Factor of Safety...
A pressure vessel of 12” outer diameter and 0.2” wall thickness is fabricated by welding plate in spiral into a cylinder that is 4 feet long. The gage pressure inside the vessel is 800 psi and 15 kip axial compression forces are applied to the rigid end caps. Determine the a) the principle stresses in the walls of the vessel, b) the maximum shear stress in the wall of the vessel (in or out of plane), c) the stress normal...
A cylindrical pressure vessel is constructed by welding steel
plates together. The pressure vessel supports an internal pressure
of 240 (psi). In addition the pressure vessel supports an axial
load of 270000 (lbs.). The inner radius of the pressure vessel is
48 (inches) with a wall thickness of 0.3125 (inches). The plates
are welded at 72 degrees from the horizontal. Determine:
a) the stresses perpendicular and parallel to the weld. Show the
stresses on a properly oriented differential element.
The...
Problem 1 The gas storage tank has a longitudinal welded seam on its cylindrical section. The tank has an inner diameter of 1.40 m and a wall thickness of 6.0 mm. Determine the magnitude of normal stress on the weld if the internal tank pressure is 1.2 MPa. a) 170 MPa b) 140 MPa c) 96 MPa d) 53 MPa e) 1.7 MPa f) 250 kPa WELDED SEAM
12 Section 4. Problem 12 (25 pts.) A cylindrical pressure vessel is constructed by welding steel plates together. The pressure vessel supports an internal pressure of 250 (psi). In addition the pressure vessel supports an axial load of 230000 (lbs.). The inner radius of the pressure vessel is 56 (inches) with a wall thickness of 0.4375 (inches). The plates are welded at 57 degrees from the horizontal. Determine: a) the stresses perpendicular and parallel to the weld. Show the stresses...
em 35? ? A cylindrical pressure vessel is constructed from a long, narrow steel plate by wrapping the plate around a mandrel and then welding along the edges of the plate to make a helical joint. The helical weld makes an angle ? 350 with the axial direction. The vessel has inner radius r = 1.8 m and wall thickness 20 mm. The material is steel with E 200 GPa and Poisson ratio 0.3. The internal pressure p = 800...
Most questions answered within 3 hours.
-
D. A student completed 20 courses in the School of Arts and
Sciences. Her grades in...
asked 5 minutes ago -
teo
pucks moving on a frictionless air table are about to collide. the
1.5 kg puck...
asked 10 minutes ago -
Problem #1
The area between Z = 0 and Z = 2.50
The area between Z...
asked 1 hour ago -
1. What is the meaning of the term communication style?
2. What are the benefits to...
asked 1 hour ago -
9.) You are buying a car that cost $26,500. You make payments of
$412 each month...
asked 1 hour ago -
. Suppose a discrete random variable has probability
distribution
P(x) = .2 if x = 0...
asked 2 hours ago -
Under the influence of its drive force, a snowmobile is moving
at a constant velocity along...
asked 3 hours ago -
Why do organizations decline? What steps can top
management take to halt, decline, and restore organizational...
asked 3 hours ago -
What mechanisms Drive speciation??
(I.e. what was Dawins theory on the orgin of species, and how...
asked 4 hours ago -
The manager at a car assembly plant believes that the mean
assembly time for a car...
asked 5 hours ago -
Which of the following is true of electron capture?
A) It decreases the nuclide's mass number...
asked 7 hours ago -
Assuming an efficiency of 43.10%, calculate the actual yield of
magnesium nitrate formed from 114.9 g...
asked 7 hours ago