The given answer is (d) (i) 15.18 kW (ii) 3.08
However, I don't know how can I solve this question.
Could anyone please help me?
Thank you
Homework Answers
Add Answer to:
The given answer is (d) (i) 15.18 kW (ii)
3.08
However, I don't know how can...
A freezer is designed, based on vapor-compression refrigeration cycle. The designed conditions are: R-134a as refrigerant,...
A freezer is designed, based on vapor-compression refrigeration cycle. The designed conditions are: R-134a as refrigerant, with a cooling capacity of 500 kW; compressor of 70% efficiency, with a superheat of 10°C before compressor inlet; operation temperature of -10°C inside the refrigerator, with the environment temperature of 25°C outside the refrigerator; Determine the pressure range of refrigeration cycle if a 10°C difference is required to ensure effective heat transfer of evaporator and condenser; Plot the refrigeration cycle on P-h diagram;...
During winter time a heat pump is operating on a heating mode to maintain a living...
During winter time a heat pump is operating on a heating mode to maintain a living room at 23oC during which the outside temperature is -5oC. The system is using R134a as a working fluid. The refrigerant leaves the condenser at 28oC and enters a compressor at -10oC. The refrigerant flow rate is 0.12kg/s. Assume an ideal VCC to evaluate the system and report the followings: a. Process diagram b. Heating capacity kJ/hr c. Coefficient of performance of the system...
please I don't really want the answer but I really need a good explanation of how to clearly understand this especia...
please I don't really want the answer but I really need a good
explanation of how to clearly understand this especially when it
comes to sketching
also please with a readable handwriting
Heat Transfer a. Define the thermal conductivity of a bar of material with a cross sectional area of A and a length L b. A student has a sheet of single pane traditional glass in their bedroom. On a cold day the temperature outside their window is 6°C...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatu...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
I figured out the first question but im not sure how to answer question 2 and 3?
i
figured out the first question but im not sure how to answer
question 2 and 3?
i
have figured out question 2. Question #3 is what is diffcult to
grasp because i have to guess my Fo #. Fo=time
1. To reduce building heating costs, modern building codes in many parts of the country require the use of double-pane windows (sometimes, called "double-glazed" or "thermopane" windows). Some of In one design of a double-pane window, each glass layer is...
-Rome can get pretty hot in the mid-summer! Most of the air conditioning units in the Tiber campus use the working flui...
-Rome can get pretty hot in the mid-summer! Most of the air conditioning units in the Tiber campus use the working fluid R-134a (1,1,1,2-tetrafluoroethane), which is replaces the less environmentally-friendly R-12 of years ago. a) Illustrate the following air conditioning cycle, indicating material, heat, and work flows, as well as given/known temperatures and pressures: R-134a is pressurized to 10.2 bar in an adiabatic, reversible compressor. This high-pressure, hot refrigerant is condensed outside of the building using ambient air to a...
System Model: Automotive Air Conditioning System Outside Air Temp: 45 oC Car Interior Air Temp: 22...
System Model: Automotive Air Conditioning System Outside Air Temp: 45 oC Car Interior Air Temp: 22 oC Heat Load = 4.2 kJ/sec rate at which heat must go in to the air conditioner to be removed from the car’s interior Refrigerant: R134a HINT: Heat enters an air conditioning system where? Refrigerant 134a … - leaves the evaporator coil and enters the compressor as a saturated vapor at the evaporator pressure of 2.8 bars. - It leaves the compressor at...
Exercise 5: I was changing 34 around too much that I just made it a separate...
Exercise 5: I was changing 34 around too much that I just made it a separate exercise. Suppose 310. grams of ethanol (ethyl alcohol) is in an aluminum cup of 90.0 grams. Both of these are at 30.0C. A mass m of ice at - 8.5C is taken from a freezer and added to the alcohol in the cup. The final temperature of all the components is 18.0C. Assuming no heat was lost from the system, calculate the mass m...
please I don't really want the answer but I really need a good
explanation of how to clearly understand this especially when it
comes to sketching
also please with a readable handwriting
Heat Transfer a. Define the thermal conductivity of a bar of material with a cross sectional area of A and a length L b. A student has a sheet of single pane traditional glass in their bedroom. On a cold day the temperature outside their window is 6°C...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
1.3 127 5.3 3.(10 pts) A cold storage room (10 m x 10 m x 10 m) is being maintained at 2 °C using a vapor compression refrigeration system that uses R-134a. The evaporator and condenser temperatures are -20 and 40°C, respectively. The walls and ceiling of the storage room is constructed of 15 cm thick concrete (thermal conductivity-1.37 WIm K]) and 4.3 cm thick insulation (thermal conductivity-0.04 W/[m K). The outside insulation surface temperature of the walls (or ceiling)...
i
figured out the first question but im not sure how to answer
question 2 and 3?
i
have figured out question 2. Question #3 is what is diffcult to
grasp because i have to guess my Fo #. Fo=time
1. To reduce building heating costs, modern building codes in many parts of the country require the use of double-pane windows (sometimes, called "double-glazed" or "thermopane" windows). Some of In one design of a double-pane window, each glass layer is...
-Rome can get pretty hot in the mid-summer! Most of the air conditioning units in the Tiber campus use the working fluid R-134a (1,1,1,2-tetrafluoroethane), which is replaces the less environmentally-friendly R-12 of years ago. a) Illustrate the following air conditioning cycle, indicating material, heat, and work flows, as well as given/known temperatures and pressures: R-134a is pressurized to 10.2 bar in an adiabatic, reversible compressor. This high-pressure, hot refrigerant is condensed outside of the building using ambient air to a...
Exercise 5: I was changing 34 around too much that I just made it a separate exercise. Suppose 310. grams of ethanol (ethyl alcohol) is in an aluminum cup of 90.0 grams. Both of these are at 30.0C. A mass m of ice at - 8.5C is taken from a freezer and added to the alcohol in the cup. The final temperature of all the components is 18.0C. Assuming no heat was lost from the system, calculate the mass m...
Most questions answered within 3 hours.
-
what is IoT? How is it being used today? How will it be used in
the...
asked 1 minute ago -
Please answer the four questions below.
1. If you were going to test a method that...
asked 16 minutes ago -
Provide two or three examples of support he uses to reinforce
his arguments?
The Alienation of...
asked 23 minutes ago -
QUESTION 1
Why do we see terms with multiple names in the database
community?
Consistency is...
asked 18 minutes ago -
In a titration experiment, 11.5 mL of 0.400 M H2SO4 neutralized
48.0 mL of NaOH. What...
asked 23 minutes ago -
A shot-putter throws the shot with a horizontal velocity of 10
m/s and a
vertical velocity...
asked 38 minutes ago -
Mildred sells industrial-sized refrigeration units. Her
prospective buyer's face looks tense, and his forehead is wrinkled....
asked 40 minutes ago -
Clark Heter is an industrial engineer at Lyons Products. He
would like to determine whether there...
asked 1 hour ago -
3. Use a text editor to create a comma-delimited file of user
IDs and passwords. Revise...
asked 1 hour ago -
Jensen and Associates has a projected balance
sheet that includes the following accounts. What is the...
asked 55 minutes ago -
implement a doubly-linked list in C. Each node in the linked list should contain a string,...
asked 1 hour ago -
What are some best practices and things to avoid when developing
a PowerPoint presentation or file
asked 1 hour ago