A car on a hydraulic lift rests on a cylinder with a piston with a diameter of 30 cm. If a connecting cylinder is driven by compressed air with a pressure of 65 psi, how big the force approximately will be generated to the piston to lift the car?
a. 3,000 lb. b. 4,500 lb. c. 6,000 lb. d. 8,000 lb e. 12,000 lb
A car on a hydraulic lift rests on a cylinder with a piston with a diameter...
2. A car on a hydraulic lift rests on a cylinder with a piston of a diameter of 12 inches. If a connecting cylinder with a piston of i -inch diameter is driven by compressed air with a force of 100 lb., how big the force approximately will be generated to the larger piston to lift the car? a. 600 lb. b.1,200 lb. c. 6,000 lb. d. 12,000 lb. e. 15,000 lb thats all the informtion that was given to...
A 14 500-N car on a hydraulic lift rests on a cylinder with a piston of radius 0.100 m. If a connecting cylinder with a piston of 0.050-m radius is driven by compressed air, what force must be applied to this smaller piston in order to lift the car? A. 3.53E+3 N B. 5.80E+1 N C. 4.13E+3 N D. 1.45E+4 N E. 3.63E+3 N
Pascal’s principle: What force must be exerted on the master cylinder of a hydraulic lift to support the weight of a 1800 kg car resting on the slave cylinder? The master cylinder has a 2.00 cm diameter and the slave has a 25.0 cm diameter. Pascal’s principle: A barber’s chair rests on a hydraulic piston 10 cm in diameter. The input side has a piston with cross-sectional area of 10 cm2 which is pumped on using a foot pedal. If...
The small piston of a hydraulic lift has a diameter of 8.0 cm, and large piston has a diameter of 40 cm. The lift raises a load of 15,000 N. Determine the force that must be applied to the small piston. Determine the pressure applied to the fluid in the lift.
How far must a 2.0-cm-diameter piston be pushed down into one cylinder of a hydraulic lift to raise an 7-cm-diameter piston by 30 cm?
hydraulic lift with a 26.0 cm diameter is supporting the weight of a 2990 kg vehicle (a large car or midsize SUV). (a) What force must be exerted on the 2.05 cm diameter master cylinder of this lift to support the vehicle resting on the other cylinder, the 26.0 cm diameter cylinder of the lift itself? Tries 0/15 (b) What gauge pressure must the hydraulic lines be capable of withstanding?
A hydraulic lift uses a compressor to compress the hydraulic fluid with a moving piston (piston A) of radius RA = 4.75 cm. A second piston (piston B) of radius Rg = 18.52 cm is used at the lift to lift cars. What force must be applied by piston A to lift a 13,617N car with piston B?
Question 2 - 70 Marks A hydraulic car lift system is shown schematically in Figure 1. The system is being designed to lift a 1500 kg car via two pistons (driven pistons) located underneath the wheels of the car (distributing the weight of the car so that half is on each piston). The cylindrical pistons each have a diameter of 10cm. The hydraulic system will be driven by a person sitting (or standing) on the driving piston. The car weighs...
A hydraulic lift is designed to raise a 900 kg car. If one piston has a radius of 35.0 cm and the other has a radius of 2.00cm, what is the minimum force necessary to lift the car be placed under the car?
The answer is E A 12,000-N car is raised using a hydraulic lift, which consists of a U-tube with arms of unequal areas, filled with oil with a density of 800 kg/m^3 and capped at both ends with tight-fitting pistons. The wider arm of the U-tube has a radius of 18.0 cm and the narrower arm has a radius of 5.00 cm. The car rests on the piston on the wider arm of the U-tube. The pistons are initially at...